Post a pic of your latest purchase

Thanks man! I didn't think I would own a car for years from now. I really like it, oh and what do you think louvers or no?
 
Thanks man! I dig them too, the only thing broken on the car is the passenger window motor, and the analog clock (who's isn't broken?) But all the other electrics work and for it's mileage it gets to it pretty quick.
 
Well with the US market bumpers I say leave them, but if you do the JDM or euro bumpers, than take them off, they can look really clean without all the black plastic.
 
I think I will leave them, it adds to the look in my opinion. Of course it needs fresh paint and some minor rust repair. so I will see what I do with the bumpers.
 
Take the bumpers off, these cars look so much cleaner without them. Goes for pretty much every car of this era where these hideous bumpers were slapped on to meet safety regulations.
 
I should take them off? I will check out some pics of some removed ones.
 
Isn't some of the metal body work molded around some of the bumpers? Like there are indents in the metal to accomidate them? And wont removing them void some sort of safety shit?
 
I've had my eye on a solid but ugly 240 just up the road from the shop. It's been sitting for a couple years, I bet I could get it out of the guys yard for cheap. Some easy to get 350Z running gear and.....oh who am I fooling!? Like I need ANOTHER project.....
 
Swagger said:
I've had my eye on a solid but ugly 240 just up the road from the shop. It's been sitting for a couple years, I bet I could get it out of the guys yard for cheap. Some easy to get 350Z running gear and.....oh who am I fooling!? Like I need ANOTHER project.....

+1 Buddy
 
I am not sure if I am going to mod mine to much or not. Any tips on something quick, easy, and beneficial?
 
Swagger a solid 240 is next to unobtainium. Those cars came from the factory with rust pre-installed. But I do love them. ; )
 
Jared. You know, that with a little work its pretty simple to swap in the complete drivetrain from a Skyline into one of those old girls...

http://cgi.ebay.com/ebaymotors/Nissan-Skyline-R33-GTS25T-Rb25det-Engine-swap-Rb26-sr20-_W0QQcmdZViewItemQQhashZitem3a649d8942QQitemZ250796149058QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Now all you need is a few grand to buy the motor/tranny.

A thousand bucks for a custom driveshaft.

New wheels.

A rebuilt rear end.

And a some bigger pants to fit the diaper youll need to wear while driving it!
 
500500_1.jpg


Hobart Handler 140 Gas/Flux Welder. Now the serious fun begins.
 
Back
Top Bottom