Post a pic of your latest purchase

My barend mirrors, ram mount for iphone5, tail net, saddle bags and rear peg mounts all showed up in the last couple of days. It's xmas in July over here :)
 
socalmike_cb72 said:
Man if there was a way to confirm what type of from end and suspension this is, that would be cool. Your guess is the better than what I know.

I don't know much about track bikes, but the suspension is lowered a bit and has slicks. Also the previous owner assumed it was used as a track bike before he acquired it.

Not building my own frame. Actually just swapping out this motor to put into my cb900c. But moving over the tank, and brat seat. Already has clip ons, and new shocks.

Big problem now is that it looks like it doesn't turn over well. Starter barely can turn over the engine. So trying to figure out what to do, as I now have two 900 engines now working, and I don't want to open them up..

And for finnigan, the dohc 750's an 900's are swapable, but not the sohc.

Rear wheel is an FZR 600 or 1000 not sure on swingarm, looks suspiciously like a Honda Blackbird. Could be wrong though.
Pretty certain thats a ZX9 or ZX6 front end, if the stanchions are 46mm that would confirm it.

Strangely enough I have a set on the front of my 900, yours have the fender brackets taken off and the original 6 pot tokico's I have yet to remove the bracket and have swapped the 6pots for 4 pot nissins.

9193373959_146668986e.jpg


That tank looks like a KZ model and your frame is an F model the KZ tanks are shorter so the frame might of been modified to mount the rear of the tank. Like wise you would have to modify your to fit that tank.
 
JustinLonghorn said:
Prepping for Mid-Ohio, sir?
You know it!

Rich Ard said:
Agreed. A buddy has them on his Tuono and they're solid.

Here's the bags plus the other items :) They fit really well on the bike considering that Buell's themselves are relatively short bikes. I could fit a weekend worth of clothing in them but that's about it. I will eventually get a nice tail bag to tie it all together. I paid $53.99 for the bags on Amazon. You'll notice the strap sits right in place of my ass... I had to swap out the rear turn signals with smaller ones. The OEM lights were giant and pushed the bags forward. They sit about 3" back now...

9289287768_6ae8349120_c.jpg

9289288650_e3765748ab.jpg

9286510769_647709a934.jpg


Here's the bar ends and the Ram mount. Everyone who want to mount a phone needs a ram mount.... there's just nothing I've found better or more versatile...

9289285864_406f617435_z.jpg
 
Been making small baby step changes on the GS1100E. Wife has been out of work after knee surgery so free money has been slow to come by. Made a few small trades, some sales on some other bike items, an old helmet a buddy wanted, and was able to pick up this KOSO gauge on the cheap.

It has all the right functions and idiot lights so time will tell on the reliability "and whether my fuel wiring hookup is right for the fuel gauge). It's a small gauge with MPH, Fuel, Tach, odometer, and trip odometer all in one unit. Slowly figuring out how to clean up the bars and work my way back to other projects in the fall if needed.

I have done a "little" research but if anyone knows anything about the KOSO gauges like "will I be replacing it in a month"; let me know. So far so good.

Gary
71876_440136406085392_1346831046_n.jpg


1069914_440136059418760_652389330_n.jpg
 
JustinLonghorn said:
Hell of a purchase man. Careful though, us dtt'ers will be hitting you up for upholstery work. Ha.

I'm fairly sure when I'm done with my seat you will NOT be wanting me to work on anything... ;) ;D ;D
 
Maritime said:
GK, How much if you don't mind me asking. I need to replace my GL1000 speedo and that might work for me.


$146.00 with free shipping to my door. Not bad in comparison to some of the other knock offs etc. I ordered through Riders discount on ebay and already had a credit with them so it worked out even cheaper. The shipping was free and took 1 day from Mi to OH. Not sure what the time frame would be to your neck f the woods.

Gary
 
Thanks, I think the Dan Moto gauge I was eyeing is about half that. Still a good price for that style though, most I have seen start at 175 and go up.
 
Tifun said:
Here's the bar ends and the Ram mount. Everyone who want to mount a phone needs a ram mount.... there's just nothing I've found better or more versatile...

9289285864_406f617435_z.jpg

I just ordered the "X-grip" style mount from RAM. I had been looking for a phone holder for my Triumph Tiger for a week or so and just wasn't happy with what I was seeing. Saw your post and looked them up. Thanks for the post.
 
Maritime said:
Thanks, I think the Dan Moto gauge I was eyeing is about half that. Still a good price for that style though, most I have seen start at 175 and go up.

I origionally had a Danmoto ordered from another supplier. After waiting almost 6 weeks and not being able to even get a tracking number my patientce was gone on the waiting game. >:( >:( >:(

Gary
 
AzHonda said:
I just ordered the "X-grip" style mount from RAM. I had been looking for a phone holder for my Triumph Tiger for a week or so and just wasn't happy with what I was seeing. Saw your post and looked them up. Thanks for the post.

You won't be disappointed. I already love mine. I got the u-bolt clamp style which installs easily and leaves no marring with the plastic sleeve spacer. I found amazon was cheaper to buy from than buying direct from RAM. Just an FYI.

-Keith
 
I bought the ram mount adapter that replaces a bolt on your handlebar clamp. Very slick and no marring issues at all.
 
bradj said:
Yz front end for the tracker

Want to give that to me for my tracker? :-*

I can't for the life of me find a decent deal on a decent front end around here.
 
Back
Top Bottom