Post a pic of your latest purchase

[Mbstr51]

My 29 modelA is in the shop for a fresh top n interior, Received the windshield wiper motor n blade plus floor matt and misc hardware today!

 

[cxman]

here is a "new" cb900c frame to start a new cafe project currently undergoing a cat scan for safety



and here is a sneak peak at my one of my goldwings wearing its new spring front end

 

[johngofast]

Ha, cat scan for safety. That's hilarious.

 

[Hoosier Daddy]

here is a "new" cb900c frame to start a new cafe project currently undergoing a cat scan for safety

Gonna have a 10 speed Cafe' ?

 

[CharlieT]

Is that a leash you have tied around that Goldwing??

 

[cxman]

yup and this way i can keep riding the bike (im using it to develop and put some miles on a new carb kit)

while i prep the frame and send it out to powder coating then i will mount the new front end

then swap the powertrain and electrics over so its quicker

i also have another fuel tank and set of side covers ect so i can get all that stuff prepped and ready

so i should have everything done in a few days once its all ready

 

[Mr_Dunev]

I needed some old containers to use for draining gas from barn finds.

 

[Hoosier Daddy]

I'd love to have a few of the "Jerry Cans" like the one on the right...
CLASSIC!!!!

 

[Mr_Dunev]

I'd love to have a few of the "Jerry Cans" like the one on the right...
CLASSIC!!!!

It is stamped 1984 USMC

I paid $25 for all 3

 

[Hoosier Daddy]

USMC... Score!
That middle one is probably gonna leak like a sieve out of the flexible goose neck spout... least mine always did.

 

[mark13018]

Just bought this table lift from a good friend of mine... I didn't look it over well for identification mainly because I was told the guy he bought it from made it.
It is very sturdy. It is in the middle position here and goes up one and down one in locked positions. The front wheel chock uses a standard 1/2" drive socket wrench to operate. The underside of the table top is braced like crazy!
Came with the custom flames on top ;D

I paid $300 for it which is the same price I would've paid for the harbor freight one but this one is much better.

 

[Mr_Dunev]

Thats a cool looking stand ^^

Looks more stable than my HF stand haha

 

[Tifun]

Just bought this table lift from a good friend of mine... I didn't look it over well for identification mainly because I was told the guy he bought it from made it.
It is very sturdy. It is in the middle position here and goes up one and down one in locked positions. The front wheel chock uses a standard 1/2" drive socket wrench to operate. The underside of the table top is braced like crazy!
Came with the custom flames on top ;D

I paid $300 for it which is the same price I would've paid for the harbor freight one but this one is much better.

I saw this posted on the indyvintage Facebook page. That table is giant!

 

[mark13018]

My friend and I are both on that page. He probably posted it on there also... It is definitely a beast. Pretty amazing. I'm very happy with it.. Thanks.

 

[Maritime]

My friend and I are both on that page. He probably posted it on there also... It is definitely a beast. Pretty amazing. I'm very happy with it.. Thanks.

I would be too that thing is great.

 

[canyoncarver]

Words cannot express how much better my garage is with a lift.

 

[sbaugz]

Just purchased this bike today. Can't wait for delivery.

 

[crazypj]

Words cannot express how much better my garage is with a lift.

I would extend the base wider, those lifts get a bit unstable when raised

 

[Andrew21502]

Bell 500 Custom helmet.

 

[Mr_Dunev]

Just purchased this bike today. Can't wait for delivery.

Good looking bike!
I just bought a '78 KZ400. I love it