Post a pic of your latest purchase

For the Rex.
 

Attachments

  • goldvalves.jpg
    goldvalves.jpg
    562.2 KB · Views: 324
Programmable ignition just arrived for the drag bike. It is just a little plastic black box with some leads hanging out plus a CDROM and coils so not much to show.
 
Finally joined the club with a lathe at home. South Bend 9". Came with 3 and 4 jaw chucks, steady rest, follower rest, face plate with a dog, and the part I'm most excited about, a mill table attachment that goes on the cross slide, effectively turning it into a little milling machine. Good haul for 500 bones.

e3438ac5aea23d1939dceb50e0b3194e.jpg


3c6af6b5b9c0687b71b167b45be7b9dd.jpg
 
hurco550 said:
Finally joined the club with a lathe at home. South Bend 9". Came with 3 and 4 jaw chucks, steady rest, follower rest, face plate with a dog, and the part I'm most excited about, a mill table attachment that goes on the cross slide, effectively turning it into a little milling machine. Good haul for 500 bones.

e3438ac5aea23d1939dceb50e0b3194e.jpg


3c6af6b5b9c0687b71b167b45be7b9dd.jpg

Nice score. A quick change tool post, you will want soon.
 
hurco550 said:
Finally joined the club with a lathe at home. South Bend 9". Came with 3 and 4 jaw chucks, steady rest, follower rest, face plate with a dog, and the part I'm most excited about, a mill table attachment that goes on the cross slide, effectively turning it into a little milling machine. Good haul for 500 bones.

Very nice! Great find my friend!
 
Thanks Cory! And j-rod, spent the last few years in tool and die before teaching full time. I was spoiled with carbide and I don't know if I can go back lol
 
hurco550 said:
Finally joined the club with a lathe at home. South Bend 9". Came with 3 and 4 jaw chucks, steady rest, follower rest, face plate with a dog, and the part I'm most excited about, a mill table attachment that goes on the cross slide, effectively turning it into a little milling machine. Good haul for 500 bones.

e3438ac5aea23d1939dceb50e0b3194e.jpg


3c6af6b5b9c0687b71b167b45be7b9dd.jpg

Great score, especially with the milling attachment. I recommend you get the book "How to refurbish a southbend lathe" (I think that's what it's called), plus get a wick kit for it and go through the lathe replacing those parts.

Book: http://r.ebay.com/6h3upv

Wick felt kit: https://www.ebay.com.au/ulk/itm/150425056041
 
jetmechmarty said:
Do you have straight rate springs to go with that?

Thanks for the reminder. I won't pull them apart until it's all here. Spacing out the purchases if you know what I mean. If nobody's noticed, lol, I'm not fast in the garage.
I have springs on the way for the KZ twin too.
 
neevo said:
Great score, especially with the milling attachment. I recommend you get the book "How to refurbish a southbend lathe" (I think that's what it's called), plus get a wick kit for it and go through the lathe replacing those parts.

Book: http://r.ebay.com/6h3upv

Wick felt kit: https://www.ebay.com.au/ulk/itm/150425056041
Haha, thanks man! I actually bought the book and felt kit before I even brought the lathe home. =) sitting in the chair reading it now
4fdb26ef57c683a86417f73dbd83e300.jpg
 
hurco550 said:
Thanks Cory! And j-rod, spent the last few years in tool and die before teaching full time. I was spoiled with carbide and I don't know if I can go back lol
True that. I use nothing but inserts anymore.
 
hurco550 said:
Haha, thanks man! I actually bought the book and felt kit before I even brought the lathe home. =) sitting in the chair reading it now
4fdb26ef57c683a86417f73dbd83e300.jpg

Smart! These things will go forever if you look after them. Mines a 1946 and still in excellent mechanical shape. However had not been looked after so if I hadn't replaced a few parts and cleaned some stuff up, it might have not lasted a long time extra.
 
neevo said:
Smart! These things will go forever if you look after them. Mines a 1946 and still in excellent mechanical shape. However had not been looked after so if I hadn't replaced a few parts and cleaned some stuff up, it might have not lasted a long time extra.
I learned turning on a 40's era South Bend that was in the family tool and die shop. They truly are a fantastic machine. I'm planning on holding onto this one and it could possibly be passed on to the family too. A refurbish is in order before I ever put it under power. It has set idle for a good 15 plus years. I would imagine the wicks and oil are pretty dried up inside, but all the ways are in good shape, so I think it will be a nice piece to last a lifetime
3ddc6092dc0528b15b450494144f9d48.jpg
 
Back
Top Bottom