Post a pic of your latest purchase

Could be YOUR latest purchase...

I make these replacement kits for all Norton Featherbed frames (also used in Triton / NorBSA / NorVin builds) to replace the wimpy 1/2" or 5/8" swingarm pivot bolts, and troublesome infernal "rubberlastic" bushings once and for all.

The spindles are turned from high grade 3/4" steel with bolt-up security plates (stainless steel hardware). Bushings are high quality sintered bronze, recessed for viton o-rings to retain the lube, and include sintered bronze thrust bushings on the outer ends.

All that is required is to drill out the existing swingarm pivot bolt holes to 3/4", then mark and drill (4) 1/4" holes in the frame webs. Then, drill and tap a 1/4" hole in the top of the swingarm tube to allow lube filling. The hardest part is typically removing the *&^%$#@ old metalastic bushes! Then, simply press in or draw in the new bushings with an 18" piece of 3/8" allthread rod with 2 nuts and washers.

The result is absolutely crisp, stable rear suspension with no more fuss every time you try to remove the swingarm.

412298067.jpg


403019685.jpg


403019692.jpg


$150 + postage, about $14 in the conus.
 
:)
these are just so incredibaly cool looking and they worked well according to the guy that raced mx with them on his =RM suziki back in 78
that i think i will put a pair on my long travel 350 twin adv bike at least do some tesing with them, see if i can learn to tune them
 

Attachments

  • hiiesalu air shocks.jpg
    hiiesalu air shocks.jpg
    26.5 KB · Views: 869
Sonreir said:
Two reservoirs? Or am i missing something?
it is 2 pairs of rear shocks, air spring 2 stage air i guess
... fox airs had 2 stage air after the first year or so of production

i thoght the guy sent me a manual still looking ..
but taking them apart to reseal i will learn a bit about the functions strictly by dedunction
 
Took the day off to take my daughter shopping for her birthday. Vans shoes 50th birthday is today. Spend 50 and get a badass set of 4 pint glasses. Great bonus.


And my front master for the KZ showed up from good ol' mainland China today.
 

Attachments

  • vans50.jpg
    vans50.jpg
    310.1 KB · Views: 305
canyoncarver said:
Today. We were at a vans store in the mall.

Awesome set man. My favorite jacket I've ever had was a Vans mechanics jacket about 12 years ago. Wish I'd bought a closet full of them.
 
Shinko 244 3x17s,a 66 ct200 front fender, new-to-me valve head (no leaks! :)) and a headlight protector...all for my 64 Honda c200...looks like a busy evening!
 

Attachments

  • IMG604.jpg
    IMG604.jpg
    363.6 KB · Views: 281
Paid for this over month ago, finally came. Looks pretty good for 38 bucks.
 

Attachments

  • IMG_20160321_173623149.jpg
    IMG_20160321_173623149.jpg
    3 MB · Views: 350
Back
Top Bottom