Post a pic of your latest purchase

Still havent fixed it. Took at Magoos first car which is going up for sale. Had a flaking hood and rusty door. So for a Bday present. Dad is fixing it sonhe gets a higher selling price.
1000013538.jpg
1000013539.jpg
 
I bought an old snapper tiller friday. Saturday morning I broke it. Had to finish fixing it today because no where local had #40 chain in stock. It's kind of a pain to open a tiller upand replace the tine drive chain. But it's now working. So I can start knocking down high spots in my yard and move the dirt to low spots.
20250726_182725.jpg
20250726_182742.jpg
20250727_135459.jpg
20250727_135504.jpg
 
This is my first time using a rear tine tiller. I have to say that the area I did was less than 10 minutes to do. I'm knocking down high spots and moving some of the dirt to low spots. Hopefully it'll improve drainage around the house.
 
Picked up one of these freestanding storage racks from Princess Auto (Harbor Freight equivalent in Canada) for $65. Needed something here in the bunkie but with all the windows I didn't have anywhere good for shelving, and being able to move this around is handy.

IMG_4855.jpeg
 
Rat_ranger said:
I'd love to go to barber someday, but this one was at the Seaba Station Museum near wellston, OK. It's not huge, but going and looking is free or a booth is $15.
Click to expand...
Barber is a must see event for sure. I wondered if that wheel was from Barber as the guy selling across from us had one for sale. We commented that prices on them seem to be coming back "down to earth again" a bit as compared to the peak a few years back. I'm excited to see you use it, I assume on your current project!

I just rolled in at home from the swap, and while I only took a pegboard of patches to sell, I did pick up a few cool bits.

Really solid airhead tank that I might use on the r90/6:
20251005_184728.jpg


Spoolie hub and 21" shouldered front wheel for an upcoming chopper project. Also grabbed an 4.00 18" hipster/poser/wannabe Firestone Champion sawtooth tire for the rear of said bike:
20251005_184818.jpg


And a pair of Joe rocket leathers to match my well worn jacket:
20251005_184858.jpg
 
Hurco550 said:
Barber is a must see event for sure. I wondered if that wheel was from Barber as the guy selling across from us had one for sale. We commented that prices on them seem to be coming back "down to earth again" a bit as compared to the peak a few years back. I'm excited to see you use it, I assume on your current project!

I just rolled in at home from the swap, and while I only took a pegboard of patches to sell, I did pick up a few cool bits.

Really solid airhead tank that I might use on the r90/6:

Spoolie hub and 21" shouldered front wheel for an upcoming chopper project. Also grabbed an 4.00 18" hipster/poser/wannabe Firestone Champion sawtooth tire for the rear of said bike:


And a pair of Joe rocket leathers to match my well worn jacket:
Click to expand...
I've already got one I polished, made new linkage and laced to a new rim on my current project. I just figured for $300 the spare parts wouldn't hurt, or I can flip it to get my money back.
20250824_104620.jpg
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom