Hola Gang,
Long time lurker, first time really posting.
Anyhow, I recently picked up a project bike (my first bike too) to work on. For the sum of $500 I got nearly 2 complete bikes. One engine worked before it was pulled of the frame, the other engine is unknown.
Consider these pictures to be the before pictures.
My intention is to clean up everything, hammer in some knee dents into the tank, get a new seat, add some clip ons, sell all my spare parts (which Im sure you guys will love as I have tons of pristine parts) and paint her up flat drab olive green (think WW2 era Army vehicles). Slap on some pin up girls, and what not. Im contemplating going with pods as I do enjoy how they look. Also striping the wiring harness down and running it without a battery. I have a mechanic here in my town that does not charge too much so I will probably have him do the engine tuning/whatnot.
Also yes, They are in the kitchen of my upstairs apartment. I recently had a rim/tire combo stolen from inside my car port. Id much rather have them inside and not have parts stolen. My landlord's face was priceless.
Some advice required:
Clip ons/handle bars. Any I should look at, or avoid?
Air compressor for cleaning, Suggestions?
Any other overall suggestions/advice?
Long time lurker, first time really posting.
Anyhow, I recently picked up a project bike (my first bike too) to work on. For the sum of $500 I got nearly 2 complete bikes. One engine worked before it was pulled of the frame, the other engine is unknown.
Consider these pictures to be the before pictures.
My intention is to clean up everything, hammer in some knee dents into the tank, get a new seat, add some clip ons, sell all my spare parts (which Im sure you guys will love as I have tons of pristine parts) and paint her up flat drab olive green (think WW2 era Army vehicles). Slap on some pin up girls, and what not. Im contemplating going with pods as I do enjoy how they look. Also striping the wiring harness down and running it without a battery. I have a mechanic here in my town that does not charge too much so I will probably have him do the engine tuning/whatnot.
Also yes, They are in the kitchen of my upstairs apartment. I recently had a rim/tire combo stolen from inside my car port. Id much rather have them inside and not have parts stolen. My landlord's face was priceless.
Some advice required:
Clip ons/handle bars. Any I should look at, or avoid?
Air compressor for cleaning, Suggestions?
Any other overall suggestions/advice?