MatthiasSalzburg
Been Around the Block
Re: Salzburg '73 CB350 - First Build - Update: Primer on Tank & Tail

Rotor has larger mounting holes by Matthias Salzburg, on Flickr

Rotor has larger mounting holes by Matthias Salzburg, on Flickr

timdaugherty said:Great thread! Keep those pics coming. When you get to the point of striping your tank and seat, I would be interested to see some pics on how you do it (e.g. type of tape, how you taped it, etc.). Are you using a spray gun or rattle can? If can, what brand?
Tim
MatthiasSalzburg said:Only a slight amount. I mainly modified the frame. I ground down the top seam and welded it shut. I also ground down the two tank mount studs about 1/4" and narrowed the stock rubber mounts.
LtGeorge said:Do you think I could get away with just beating the seam down? grinding and welding back together are a bit farther than my skill set allows me to go










johnd900 said:Great thread, explanations, and pics. I'll definitely be following along. Will you please explain a bit what "seam welds" are and why you did them?