Separating CB125 forks

[Untold]

Trying to change the fork seals on my 1975 CB125S. I assume the forks are stock, but I'm not sure. They have dust caps, not fork boots. I removed the screw on the bottom of the fork leg, but the inner tube won't slide out through the seal. I'm assuming it's the type that requires the slide-hammer technique to pop the seal out but mine are not budging at all. THey've been soaking for 2 days in PB Blaster, and still no movement. Any tricks to getting these forks apart?

Thanks

 

[tom050162]

You sure theres no bolt inside the dropouts at the bottom connecting them?

 

[Untold]

Got it sorted out. Just needed to use some PB Blaster and a heat gun. Then the slide-hammer technique. Seals replaced and everything is nice and tidy now.