Serious newbie with some questions on starting a build

there is a lot of good tips on here. I agree totaly you HAVE TO establish what you want the bke to look like finished. You dont want to buy a bike, strip it down and realize the frame is nowhere near compatable with the look you are after. I am not mechanicly inclined person (no engine rebuilding for me) but I have a good grasp on how things work and how to put them back together.So I always look for a mechanicly sound example (running opptional), and go from there. If you have a willingness to try things and make misstakes you will be suprised what you are capable of. I have now completed 2 full builds and started another this year, all complete for under 2,000 easy, and these were my first attempts! I am a dirt poor art school looser turned contractor, If I can do it you can. In short find something that speaks to you and go for it!
 
VonYinzer said:
Even with "bolt on" parts, youre not going to easily build a "cafe" bike. Not a very original one at least. Unless you spend a ton of money on hand made one off parts. As far as wht bike youshould buy, theres plenty of non Honda bikes out there that are cheap too. If you want to stick with honda, and seeing as this is your first bike, a smaller twin is what you need.
Anything from the late 60 - mid 70s. Look for a CB or CL 350, 200, 175...
Honestly though, you should go out and buy a bike thats in near perfect shape. Dont buy a project if youre not willing to do A LOT of work. Building a custom (even a mild one) motorcycle is not as simple as just bolting stuff on and riding off into the sunset. Unless as stated above you want some cookie cutter ride. And hell if you want that, just go buy a modern Triumph Thruxton and be done with it. You should also learn how to ride before you turn a single wrench. No point in spending money and time on something that your just going to lay down in a parking lot.
I agree with what von is saying. start off with a smaller twin. learn the basics of a motorcycle. If you manage to master that , then maybe , and i mean maybe you might be able to handle a 55o or a 750 build. As far as a build goes there all going to cost money!! It all depends on how good you are at budgetting and how much work your able to handle with your own two hands. As far as tools goes you do need torque wrenches , tire irons, angle grinder, welding tools and some other random tools depending on how unique you want you racer to look. Keep in mind these are old bikes almost everything you run is going to be slightly modified. I do disagree on buying a kosher bike. buy some thing needing a little TLC so you learn things about building and fixing and if you funk something up you wont feel so bad. Dont bite into something you cant handle,Good luck
 
Out of all the "non running" bikes I've bought and ressurected over the years, there has only been a few that have cost me less than buying a decent running example in the first place.

So, as a newbie, my advice to you is to get your self a running bike in the best condition that you can afford. Then when you have ridden the bike and have it running sweet, do your modifications.

I've seen so many new guys buy "project bikes" and end up selling them as a pile of parts a year later for much less than they've spent simply because they lost interest or it got too hard.

Oh - and don't be afraid of 4 cyl bikes. They are the most common powerplant out of Japan because they are good and reliable. Both reasons are noteworthy. And the only thing more "complicated" on a 4cyl bike is the carbs.

And stay away from British bikes unless you really want to spend more time in your garage swearing at it than riding it ;D
 
Diddo!! start with a twin. if you absolutely have to have something big(ger) look for a 500t or XS650. But if it were me I'd look for a 350 or 360. Cl450???!! plenty of power to start with.

if you just want something you can convert cosmetically and can afford a good runner then sure grab a four but don't bite off more than you can chew you'll get discouraged and then one of us will be telling you "we'll call" as we wheel that ride away! 8)

Hey where are you? I have an XS400 for sale!!
 
All of this has definitely given me some things to think about. I'm zeroing in on a CB350. Right now it seems like that would be the best place to start. I think I'm approaching this with the right mindset.

1. This will cost me more than I will every get out of it. I'm not doing this to save a buck but rather to learn how my bike would work
2. I don't need a rocket (at least not now ;D) so a 350 sounds like the sweet spot. Not underpowered like a 125 could be and not super powerful like a 750 or more could be.
3. Honda is reliable and easy to get a hold of parts wise. Sure, it might not be 100% of what I would like but it seems like it's a good bike to start with.
4. Who says this will be my one and only build? Start small and go from there.

So for now it looks like I finalize if the 350 is the right choice and then learning all I can about the thing. I figure it would be very wise to learn about the bike so when I do get around to buying one I'll know a good deal when I see it and know when to run from a bad deal as well.
 
bwhicks said:
All of this has definitely given me some things to think about. I'm zeroing in on a CB350. Right now it seems like that would be the best place to start. I think I'm approaching this with the right mindset.

1. This will cost me more than I will every get out of it. I'm not doing this to save a buck but rather to learn how my bike would work
2. I don't need a rocket (at least not now ;D) so a 350 sounds like the sweet spot. Not underpowered like a 125 could be and not super powerful like a 750 or more could be.
3. Honda is reliable and easy to get a hold of parts wise. Sure, it might not be 100% of what I would like but it seems like it's a good bike to start with.
4. Who says this will be my one and only build? Start small and go from there.

So for now it looks like I finalize if the 350 is the right choice and then learning all I can about the thing. I figure it would be very wise to learn about the bike so when I do get around to buying one I'll know a good deal when I see it and know when to run from a bad deal as well.

I reckon you have arrived at a bloody good starting point.
Fair play to you. There is so much knowledge and support on here for that model that you'd never be stumped for long.
I saw a 350 twin raced this autumn and I was blown away at the state of tune they can be taken to, so it's got masses of potential power wise.

P1020985.jpg
 
bradwsm said:
there is a lot of good tips on here. I agree totaly you HAVE TO establish what you want the bke to look like finished.

This is something I dont do... I let the bike "develop" piece by piece, part by part. It keeps the cost down, and also my bikes dont sit around for moths waiting for that oh so elusive and extravagant part. I just sort of let them build them selves... Sometimes I have $, sometimes I dont.. But I'm always building.

Louie
 
I think a first time builder with limited chops should have a pretty good idea of what they're trying to do but should also keep an open mind to changes and happy accidents etc. Once you have some tools and fab skills you can get more creative and allow the bike to come to you a bit. The first build is probably almost always expensive. you're just going to make some mistakes.

Maybe I'm just trying to make myself feel better. :'(
 
I guess I will throw in my experiences. I will never buy a brand new bike again... ever. Twice this has ended up with a pile of parts in my garage that I am making payments on and can't ride. First bikes should be reliable and relatively small. First bikes should not be big huge projects. A running cb350 that is sound is a great first bike. Suzuki GS500 also make great first bikes. Learn to ride then invest in a project. Just like a new bike normally isn't a great 1st bike decision, dumping 2.5k into a cb350 to make it a "cafe" only to lay it down a month later because of inexperience isn't fun either. Get a bike that is running and reliable and ride the piss out of it and change things as you go to make it yours.

That being said, I am stoked to have you here wanting to learn more... this is a great community with a bunch of really cool guys, and even a few lovely ladies. Regardless of the route you take, it will be rewarding.
 
agreed.

I think we all get caught up in the fact that we're pretty sure the dude is gonna dive right into a full on build the way a lot of us did.
 
Back
Top Bottom