Several different café seats, cheap.

[J-Rod10]

These were used as mock ups on bikes, the one with the cover was on a personal bike. I've sanded them down and hit them with a coat of primer. They have gel coat below the primer. They are all in good shape.

Seat 1
26.5" L, 16.5" seating area, 7.5" at the front, 8.75" at the widest. $40 + the ride.

Seat 2

This seat was molded on a CB350T. It fits similarly sized bikes. Has a 1/2" recession in the rear. This seat is unused for anything. It was the first out of that mold and put away. $75 + the ride.

Seat 3

This seat was mocked up on a CB350. $35 + the ride.
21.5" L, 11.5" seating area, 7.75" at the front. 8.75" at the widest.

Seat 4

This seat has never been used, outside of sitting on a Sportster to get measurements for the subframe to be built. $65 + the ride.

27" L, 16.5" seating area, 8.5" at the front, 10.5" at the widest.

Seat 5

This seat is unused as well. $65 + the ride. This one is for the bigger bikes. Fits the CB750, Triumph Bonneville, and similar sized bikes.

Seat 6

This is a Champion style flat track seat. $75 + the ride.
This seat is new, and unused.

Seat 7

This seat has the same dimensions as the seat with the holes. $75 + the ride.

 

[VonYinzer]

Could I get a side shot of "Seat 3"?

 

[J-Rod10]

Absolutely.

 

[J-Rod10]

Seat #3 is sold. Von, you'll get a tracking number in the morning.

 

[J-Rod10]

Seat 1 sold.

 

[VonYinzer]

Got it yesterday. Thanks for the quick shipping. Seat is nice and strong too.

 

[J-Rod10]

Not a problem at all. Glad you like it.

 

[1sttimer]

Edit:

Hey J-Rod, still got #5?

Thanks.

 

[J-Rod10]

Yes I do.

 

[J-Rod10]

Seat #5 sold.

 

[TonySeaB350]

Did we talk before about a 350 seat that will go over the stock hump? I feel like it was you but I haven't been around in a bit. If you still have one let me know.

 

[1sttimer]

Mine was just delivered. Great service and fast shipping!

 

[J-Rod10]

Did we talk before about a 350 seat that will go over the stock hump? I feel like it was you but I haven't been around in a bit. If you still have one let me know.

We did. It would be seat #1 in this thread. That one has sold. I am awaiting the arrival of some more resin, and can make you one if interested. I have been spending a whole lot of time on the milling machine, and not much at all in the fiberglass section of my shop, and am out of stock of that particular seat. I can have it to you within a week, though. I have a thread as well on the new seats I am selling, with them on sale, these were some I have been using to mock up on bikes, carry to shows for a few years that I am clearing out. So, it'd be a bit more expensive than the handful I had in this thread. Shoot me a PM if interested. Thanks