Sh00bs CB400t cafe project

Sh00bs

New Member
Hi all,

got it completely stock, no rust, everything works with 16k on the OD.

so far ive removed the air box and stock rear plastics, ordered a seat pan that arrived the other day. picking up square tubing for custom rails as my oem rear sub is way too wide for the seat


velocity stacks and pods also in the mail and some jets as of today from http://www.z1enterprises.com/Home.aspx

also planning on going mono shock with some simple eye hole mounts - certified in mig & tig all positions and fab many of my own parts, havent looked into shocks at all yet or mounting... one thing at a time i suppose

i'll update this as the project goes along, im hoping to finish it by summer


stock when i picked it up and current state

(side case is off bc i have a shifter shaft oil seal leak and im waiting on the gasket/oil seal to come in - before anyone asks :D)
 

Attachments

  • CB400-1.jpg
    CB400-1.jpg
    12.5 KB · Views: 1,813
  • withSEAT.jpg
    withSEAT.jpg
    25.3 KB · Views: 1,859
Welcome.

I don't want to burst your bubble or rain on your parade, but that bikes is one that is close to impossible to recalibrate jetting if the airbox is removed. CrazyPJ is the guy that knows more about those crabs in their various forms than the rest of us combined.

Main jets are not enough to correct the fuel slope AFAIK. Do the research before you go too far.

The seat etc are all a matter of personal taste and I am having the same problem with a 750 Suzuki in that most of the aftermarket seats just do not look right and take a lot of modification to make them work. The design problem in this case is that eh "Superdream" tank is designed to integrate with the side covers and stock seat and doesn't lend itself to a sixties style cafe racer seat.

That doesn't mean that nothing can be done, but if you want it to look good it will take a little work to hide the frame shape as well as working with the tank shape. I suggest some CAD (Cardboard Aided Design) :-).

With a challenging shape like that, I usually print out a pile of pictures of the bike from each side and just color in different shapes, until something starts to emerge. If you are really good with photoshop, that works too, but I can get there much faster with a couple of colored pens/markers/crayons.

Search on line for examples of your bike that have been modified and critically review what works and what doesn't in others handiwork. For example you might like the hump shape on one but hate the lower line, and on another the lower integration might be amazing but the hump shape is out of proportion. The smartest looking CB400s usually have a completely new sub frame, but that is a lot of work and not all of us have those skills.

You may be able to disguise the tank shape with a clever paint scheme.

If you want to ride it this summer, I might suggest putting it back to stock, making sure it is clean and serviced and has good tires etc and get used to it and work on ideas so that you are ready to make whatever changes you have decided on over the next winter.
 
teazer said:
Welcome.

I don't want to burst your bubble or rain on your parade, but that bikes is one that is close to impossible to recalibrate jetting if the airbox is removed. CrazyPJ is the guy that knows more about those crabs in their various forms than the rest of us combined.

Main jets are not enough to correct the fuel slope AFAIK. Do the research before you go too far.

The seat etc are all a matter of personal taste and I am having the same problem with a 750 Suzuki in that most of the aftermarket seats just do not look right and take a lot of modification to make them work. The design problem in this case is that eh "Superdream" tank is designed to integrate with the side covers and stock seat and doesn't lend itself to a sixties style cafe racer seat.

That doesn't mean that nothing can be done, but if you want it to look good it will take a little work to hide the frame shape as well as working with the tank shape. I suggest some CAD (Cardboard Aided Design) :-).

With a challenging shape like that, I usually print out a pile of pictures of the bike from each side and just color in different shapes, until something starts to emerge. If you are really good with photoshop, that works too, but I can get there much faster with a couple of colored pens/markers/crayons.

Search on line for examples of your bike that have been modified and critically review what works and what doesn't in others handiwork. For example you might like the hump shape on one but hate the lower line, and on another the lower integration might be amazing but the hump shape is out of proportion. The smartest looking CB400s usually have a completely new sub frame, but that is a lot of work and not all of us have those skills.

You may be able to disguise the tank shape with a clever paint scheme.

If you want to ride it this summer, I might suggest putting it back to stock, making sure it is clean and serviced and has good tires etc and get used to it and work on ideas so that you are ready to make whatever changes you have decided on over the next winter.

Appreciate the critism(:

The guys over on the honda twins forum see otherwise though. They say I can run 90 mains and 127 secondaries with stock exhaust and some pod filters (as long as the pods let the air flow in w/o the hump after the filter part). OR 95 main and 125 secondaries with a less restrictive exhaust and same goes for the pod filters

Tubing is bought, welder has wire/filler and gas, and fresh blades on the jig saw and grinder

I'll report back after this weekend with how it's coming
 
It can be done depending on the type of Carbs, 2 jet vrs 3 and I have done it, so has Junior, and 2-3 other members here. Those numbers are a starting point I know mine ended up around a 90 and a 135 but I had open emgos with the crossover removed. Bike topped out at 110 MPH and pulled hard the whole way there.
 
As far as the tank goes, Munamankeli did a pretty good job concealing the awkward shape on his 400n:


 
If you are building a subframe to the seat, you can match the lines of the tank.

I'm a fan of those tanks. I used it on my 750 build rather than building one for it.

20150320_121947_zps7jjt0ymv.jpg
 
Got the pan rails built/bent
.6 OD chromoly with a .055 thickness

I think I'm going to be using a gsxr or r1 rear shock as my mono

Also got my pods and seals in :)
 

Attachments

  • image.jpg
    image.jpg
    888.1 KB · Views: 300
  • image.jpg
    image.jpg
    779.3 KB · Views: 292
  • image.jpg
    image.jpg
    1.1 MB · Views: 305
R1 mono shock came in and heim joints ordered for mounting

Also got the jets in and air pods on
 

Attachments

  • image.jpg
    image.jpg
    1.3 MB · Views: 306
  • image.jpg
    image.jpg
    787.4 KB · Views: 280
Mono shock is on, dual kick stand is off

Just waiting on getting the seat pan back with the pads on it then the seat rails will get welded on with some support and the electronics will be hiden
 

Attachments

  • image.jpg
    image.jpg
    2.1 MB · Views: 318
Got my seat pan back with a cushion fabricated on(: time to get working again
 

Attachments

  • image.jpg
    image.jpg
    1.2 MB · Views: 285
Back
Top Bottom