ridesolo said:Got the new clutch springs in today:
Yup, they're a bit longer than the stockers:
All installed and torqued to 90 inch pounds. About ready to button the thing back up.
3DogNate said:Cool... I'm probably going to have to
Looking forward to your report... I'm probably going to have to revisit my clutch again... mine just got back up and rolling again.. and my first jaunt around the neighborhood and I could feel it slipping still even after upgrading to new EBC springs...
ridesolo said:Might be a fun bike to ride w/ the healthier engine and the 42 tooth rear sprocket, though.
hurco550 said:top out at 45mph, but the front end will be up the whole way there =)
I'm still gonna do it =) then we'll race haharidesolo said:And to think I was actually considering putting a XR600 lump into that frame! Pish posh, silly boy!
ridesolo said:And to think I was actually considering putting a XR600 lump into that frame! Pish posh, silly boy!
ridesolo said:And to think I was actually considering putting a XR600 lump into that frame! Pish posh, silly boy!
hurco550 said:I'm still gonna do it =) then we'll race haha
ridesolo said:(I still will if I get the chance.)
ridesolo said:As long as I'm taking on this build I'm looking forward to that report too! I'm getting there slowly. I've made so many changes that I have no idea where it's going to be at first. I'm using the the Ninja 17" wheels and that rear sprocket is several teeth larger than the original on the Honda. I plugged all the info into a ratio calculation site and it looks like if I put about the smallest sprocket I can buy to fit the Kawi carrier on there I'll get the thing back to about the same engine RPM to Highway speed as what came original on the Honda. Once I get it all worked out so I have a decent, workable highway RPM range then I'll worry more about the clutch. Might be a fun bike to ride w/ the healthier engine and the 42 tooth rear sprocket, though.
deviant said:Not sure how I just now got on board with this. I love it. Time to button her up.
I used Barnett CB350 heavy duty race springs in the clutch on my other 360.










Tune-A-Fish said:Wear gloves, cover drip zone... carry on soldier.