teazer said:I suspect that the brackets are to fit those calipers to H1 or H2 or Z1 forks.
teazer said:I suspect that the brackets are to fit those calipers to H1 or H2 or Z1 forks.
Jimbonaut said:I dig coloured calipers - just powdered mine bronze. Think it would look a bit much if the bracket was silver too - the way you have it set up looks great.
advCo said:I agree, I like the silver caliper and black bracket. Gives some detail to the whole assembly but the bracket blends in nicely with the wheel.
Hurco550 said:Looking swell my friend! Now if the lazy neighbor will get off his rump and finish your frame, you'll really be able to get it going on this thing![]()
crazypj said:'next time' () get a $10.00 Harbor Freight 1/4 sheet sander, should save a lot of time if you use JB Weld again
You can thin JB Weld. Use acetone or lacquer thinner.ridesolo said:[size=12pt]JB Weld seemed to be the best filler to use; solid, strong, permanent, and little shrinkage. It works well but I wish it could be thinned just slightly to make it easier to spread more smoothly.
irk miller said:You can thin JB Weld. Use acetone or lacquer thinner.
irk miller said:One teaspoon per 2 ounces of mixed product, according to the JB Weld site. I would just do it per taste.
trek97 said:Try thinning w Tobasco sometime...Its the best ever.
Serve it up hot w Vodka and Grapefruit juice over ice.