Suzuki GS1000L - first mechanical project ever in Toronto

Speedorchid

New Member
Alright. Here I go. This is what I got. I'm going to slam it down and hopefully make myself a sweet ride. I welcome any comments and links to great photos for this bike as well as suggestions on what I should do to make it kick ass!! Wish me luck...love the forum and support, thx to all.


52546b5_20.jpg

64997l_20.jpg

9271gca_20.jpg

9722215_20.jpg
 
yep.. this puppy is gonna be nice...

She gonna get:
- slammed with 11 inch rear shocks & dropped front end
- Telefix Clip-ons
- Busa front master cylinder
- swapped out tank - either an SR500 or an earlier model GS1000 tank
- blacked out wheels
- smaller signals
- either a cafe racer or brat style seat...
- smaller gauges
- bar end mirrors

Gonna rid of the monster gauger, relocate the key & the electricals..

Also searching for a stock 4-4 78-79 gs1000 exhast so if anyone knows has one they'd like to sell or know where a set might be, let me know!

Gonna be a fun friday night build!
 
shorty shocks arrived in New York....Telefix ordered and head light ears came in as well.....Took off the seat and battery, bought a motorcycle lift and ratchet set...excited....wheels getting taped up for a spinning flat black mat spray...come on out sunshine!! Going to look sick!

telefix-1.png


Screenshot2012-02-05at115122PM.png


IMG_8656.jpg
 
you may as well use that new ratchet set you got and pull off that rear grab bar, the rear fender and signals lights!
 
Parts bike arrived: GS1000S instead of the L. Going to be pulling some stuff off and selling stuff if you need anything. Wow I'm realizing I'm a little over my head. Now my garage looks like a motorcycle shop...My wife is going to kill me when she gets home...ha ha

Here's the parts bike..
IMG_8772.jpg

IMG_8770.jpg

IMG_8769.jpg


Here's the garage....
IMG_8768.jpg
 
Good start on the Project! :D Be careful letting Noel near it though unless you really like flat black! ;D ;D

I think your parts bike might be an "E" model instead of the "S". The S is kinda special. :o


SuzukiGS1000S793.jpg



If you have an S, you should restore IT! 8)
 
Looking good, mate. Check out thegsresources.com for any GS info you might need. Its tha Holy Grail of Suzuki GS info!

I had a GS850g for a while that I modded, if you go pods be prepared to retune the carbies with a kit and adjustable needles - I'm in Australia so have the luxury of those things stock. Settings for pods on the 850 were 18% oversize mainjet, 1 or 2 raising steps on the needle and a tweak of the mixture screws to around 3 turns from lightly seated. Pulled like a raging elephant from 2k to redline in any gear.

Keep up the good stuff mate.

Cheers - boingk
 
I'd strip and rebuild the parts bike with good bits off the other "custom" and fit superbike bars and go all Wes Cooley replica on it.

the L model with brokeback frame and sill wheels is a lot harder to make into anything respectable.

If this is your first project, I'd recommend service it and ride it and change as little as possible until the end of 2012 when you will have done enough miles to get a feeling for what you really want out of ia bike and how you want it to look.

Or yiu can try the jump in at the deep end and grind things off that you might later need and end up with a pile of parts in a garage ten year project bike. What I'm getting at is that sometimes in life more haste does not make for more speed. There's an old Latin saying that you may have heard: Festina lente (make haste slowly).

Stripping and grinding (a bike...) is a form of instant gratification that doesn't always lead to long term satisfaction if you get my belabored drift.
 
I think your parts bike might be an "E" model instead of the "S". The S is kinda special. :o
If you have an S, you should restore IT! 8)

you are right.....thanks guys for the input...going to take off the exhaust asap, hoist her up and see what she's all about over the next few days. Some of the bikes on this site are unbelievable!!
 
boingk said:
Looking good, mate. Check out thegsresources.com for any GS info you might need. Its tha Holy Grail of Suzuki GS info

Cheers - boingk


wow is it ever...
took off the exhaust and going to wrap it and paint the end black with some good ol BBQ paint
IMG_8943.jpg


I wanted to swap the tank with a yamaha(top left) but no go as the frame gets in the way....hmmmm I'll have to see what to do. Now I have 3 tanks.....any thoughts? I'm looking for something a little thinner and slick vs my existing chunky fat tank.
IMG_8946.jpg


I'm getting inspired online..want to move it in the direction of this one...
333b.jpg
 
Got myself a dremel, some shelving for the parts, some black paint and 600 sandpaper...got the exhaust off and going to try and polish the aluminum engine coming up. I'll show some before and after...any thoughts on how to polish it up nice and easy. Tried some rubbing compound but didn;t get all the corrosion off. Was going to try up the steel wool and if that doesn;t work...its DREMEL time...lol
lots of fun thanks for the replies and the great forum!
 
Got the cylinder head covers on the side nice and shiny... That brasso stuff worked great. I found that of the 8 screws that held on the 4 covers, there were 4 different types....i'll be fixing that soon.
IMG_9246.jpg


Exhaust going to be painted tomorrow...I hope.
I sanded the rust off, wiped her down with some soap and water and then rinsed...bought some good old BBQ paint and well see what happens.
IMG_9244.jpg


also got rid of the cheezy suzuki logo that someone stuck on. I was thinking I would sand the imperfections, then put some "bondo" right on the side where the old logo used to be....then resand, then primer, then paint....any thoughts on this process?
IMG_9239.jpg
 
Glad to see another "L" getting some lovin'. Typically they are the Red-Headed Stepchild of the GSes.
Depending on which route you want to go here, Cafe', Bobber, or Brat but since you're talkin Clip-ons I'll guess Cafe'. What's wrong with the purple tank? With that thirsty litre bike you will probably want the "bigger clunky tank" and the "E" shape is easier to get a Cafe' look... but since you are working on the "L" tank I'm guessing that's what you are going with.
There may be more stuff from you parts bike that you want to use.
The front fork on your "L" is a leading axel style, while the parts bike "E" or "C" isn't (Gawd I hope it wasn't an "S"!) so you may want to use it instead. Nice that you have so many choices!
I went more of a BratStyle look on my 750L since it just seemed to lend itself to the Cruiser shape.
Check out the "Overkill" link in my sig.
 
OVerkill thread was awesome!!!

Thanks. I decided to take off the L tank(even though I was bondoing and sanding it) and go with the "e"?? not sure all I know is that it is purple. I am going to sandblast it or sand it down and try and leaving it metal looking. I will try an epoxy or laquer rattle can. I just have to test out to see if gas will eat through it...So many thoughts on this I figured the only way to see if it works is to try it out myself.

If I only paint my mufflers with BBQ paint and don;t bake it on will it still work?

I haven;t been feeling well the last few days so just been looking at the bike in the garage instead of working on it. lol
 
New Parts picked up in Buffalo from a Friends. Driven over the border and....Declared everything...guy was super nice and let me over, no duties.
IMG_9687.jpg


also was going to sand down the tank as shown here to a rough steel looking thing
IMG_8772.jpg


and then clear coat it. Saw these in RONA but after reading the labels...none were right.
IMG_9630.jpg


I will continue searching for a rattle can clear coat. any thoughts?

CAn anyone tell me definitively what bike this is? I got it as a parts bike. thanks
IMG_8770.jpg

IMG_8769.jpg
 
Back
Top Bottom