timberwolffxdl
Been Around the Block
Essentially, I have the Swingarm, axle adjusters, axle, caps, etc. Everything but the pivot bolt itself (which wouldn't work on these old bikes anyway), and the pivot bearings (again, you'd have to make your own anyway). Also have the Mono shock, lower mounts, bolts, etc.
The swingarm pivot tube was narrowed to fit a stock CL360 frame. But it would be used on others as well that are similar width.
I'd take $100 plus shipping for the whole thing. Or trade me something cool
Pics of it on our project bike:
Length from pivot bolt to axle is roughly 21" or so, or 3" longer than the stock Honda piece as seen here (this was before I narrowed the pivot tube):
Pretty sure I still have the brake strut too, just let me know if you want me to throw it in the box as well.
Here's the shock:
The swingarm pivot tube was narrowed to fit a stock CL360 frame. But it would be used on others as well that are similar width.
I'd take $100 plus shipping for the whole thing. Or trade me something cool
Pics of it on our project bike:
Length from pivot bolt to axle is roughly 21" or so, or 3" longer than the stock Honda piece as seen here (this was before I narrowed the pivot tube):
Pretty sure I still have the brake strut too, just let me know if you want me to throw it in the box as well.
Here's the shock: