Tank sprained a leak, Repair or replace?

YogiBear

Over 1,000 Posts
I went to replace my spark plug wires the other night and discovered a leak in my gas tank. It's towards the front of the tank on the underneath side. It wasn't a gradual thing. One day it didn't leak then it did. Being that the CB750C isn't the most common bike on the road, I am kind of torn. I am considering having it fixed (if that's possible) or buying another tank and starting over. One of the things that I want is reliability. The bike is a daily rider (in dry weather) so if I do manage to get it fixed I surely don't want another leak to show up somewhere else on the tank. Especially when I'm out riding. But, what are the chances of finding a 30 year old clean CB750C tank with little to no rust?
 
I'd run it up to a radiator shop.. They can patch it in a jiff.. have them re-seal it while you're at it.. you may be out 40 bones...?
 
cafematty said:
I'd run it up to a radiator shop.. They can patch it in a jiff.. have them re-seal it while you're at it.. you may be out 40 bones...?

That sounds like a good option. I have a question though, The tank was sealed with a tank liner when I got it and has failed over time. Is that what you mean by re-sealed? I'm worried about more rust and corrosion showing up.
 
Yeah. Do you know how it was done? Some of the home kits aren't that great, and require EXTRA special attention to detail while doing it or it won't work worth a flip.

But if it's failing, that could be the source of your hole right there.. all it takes is a pin hole leak in the tank. If the liner fails, that little hole will get bigger with time. Exact same thing has happened to me.

Radiator shops are used to messing with these kinds of things. And they work on parts that are meant to be sealed under pressure.. so they could advise best what to do.
 
cafematty said:
Yeah. Do you know how it was done? Some of the home kits aren't that great, and require EXTRA special attention to detail while doing it or it won't work worth a flip.

But if it's failing, that could be the source of your hole right there.. all it takes is a pin hole leak in the tank. If the liner fails, that little hole will get bigger with time. Exact same thing has happened to me.

Radiator shops are used to messing with these kinds of things. And they work on parts that are meant to be sealed under pressure.. so they could advise best what to do.

It was done with the shitty Kreem liner. I'll give the radiator shop a call and see what they can do. Thanks man :)
 
I just spoke to a knowledgeable guy at performance radiator. He's talking about $125 for the process and since my tank has filler from a dent that used to be on the side of it, the filler could potentially come off during the process. Eeek!
 
YogiBear said:
I just spoke to a knowledgeable guy at performance radiator. He's talking about $125 for the process and since my tank has filler from a dent that used to be on the side of it, the filler could potentially come off during the process. Eeek!

Yikes! I paid 30 bucks to get mine sealed. Haven't had an issue with it.

I've tried the por 15 before.. (or rather my wife has).. man we hated our lives.. It's literally HOURS of work.. you have to come in and keep turning the tank while it dries (like every half hour for what seemed like 3 years).. and if you don't get it to coat all the way right, it's useless.

If you go look at my wife's build thread, this is pretty much the last time she touched her bike.. (over a year ago) because she stayed up all night turning the tank. In the end it didn't even work (maybe she was slacking).. So it will have to be redone. we will be throwing that tank away and finding another. Personally I'll never do that again. I'd pay whatever it cost.. haha.



aaaand...there's always JB Weld. haha.
 
Back
Top Bottom