Tarozzi vs. Woodcraft vs. Roc City Clip Ons

danfr

Been Around the Block
I'm decided on what set of clip ons to go for. I would love your opinion on what you use and why you do or don't like it. I'm leaning towards the Roc City, but don't know between the adjustable or non. this will be my first set.
 
havent tried the others... but i see no reason to.

Roccity adjustables are BEAUTIFUL pieces... definitely one of the nicest things going on my bike... and im not cheap. excellent quality, solid, great service... nothing bad to say about them.

id choose adjustables... its nice to have that option, plus they look great. also its only a few bucks more to get an optimum fit.
 
The only problem I can think of with RCC's adjustables is if you don't know where to drill them for wires. Normal clipons (non-adjustable) you can drill in any spot around the circumfrance of the bar as long as it's the correct distance up from the end. Tighten everything down and find out that your brake lever is pointing up in the air - no biggy, just spin the bar. But RCC's are more like clubmans - drill them a little carelessly and they're done for. I guess what I'm trying to say is be careful when/if you drill for the wires. Worse comes to worse, if you mess them up get some normal 7/8" pipe and use it instead.

I'd go with adjustable too - RCC puts out some killer stuff.
 
probably sounds like a dumb question, but couldn't i run the wires outside of the bars? if so, i could run the bike for a while with the wires out of the bars until i find the ideal position. measure twice, drill once....??
 
Exactly. But to run the wires outside of the bar you will have to notch out the aluminum on the housings. Just didn't want you hastily drilling holes and paying for it later.
 
big r brings up a good point... only thing is your either stuck to one position or you have to mess around before drilling and have any position you want. id go with the latter.


i say ride the bike around with only the throttle and brake/clutch installed, then once you get the feel for it install the signals and drill/run wires.
 
Back
Top Bottom