the 1980 CB750C DOHC project

acturner

New Member
Started this beginning of Jan. Never done a bike before. I was a BMW guy (still am, but expensive) and decided to try my hand at a cafe. Its a 1980 CB750C DOHC. Slowly working it. Got new controls from a 04 Honda Shadow. Clubman bars (clip ons are too damn expensive). I tried to dent the tank myslef and bondo, but it turned out like crap. (I HATE bondo). So just gonna buy a new tank from Benji's cafe. Painted the tail myself with Duplicolor rattle can. Pretty proud of how that turned out. More to come eventually.
 

Attachments

  • 1980 CB750 DOHC.jpg
    1980 CB750 DOHC.jpg
    91.2 KB · Views: 290
  • Clubman Bars.jpg
    Clubman Bars.jpg
    82.2 KB · Views: 290
  • Dented Tank.jpg
    Dented Tank.jpg
    56.8 KB · Views: 279
  • New Controls.jpg
    New Controls.jpg
    64.1 KB · Views: 287
Re: the 1908 CB750C DOHC project

the rest of what I've got so far
 

Attachments

  • painted tail.jpg
    painted tail.jpg
    41.9 KB · Views: 277
  • Primed Tank.jpg
    Primed Tank.jpg
    58 KB · Views: 284
Re: the 1908 CB750C DOHC project

oh, and the only issue so far is they guy had an aftermarket tail light on it, and I thought I wired it correctly based on the clymer diagram. this ended up being wrong. Got a green, white/green, and brown heading back to a single bulb and 2 wires. I have brake light functionality.... but no tail light. any ideas?
is there a "painless wiring" site like the one for cars I could go to for wiring kits??? Or just do the ebay tail wiring stuff I've found for CB750s?? Thanks.
 
Re: the 1908 CB750C DOHC project

Green is ground, white/green is brake, brown is running. Make sure it's a dual filament bulb and if it is the running filament isn't burnt out.
 
Re: the 1908 CB750C DOHC project

jay_kent said:
Green is ground, white/green is brake, brown is running. Make sure it's a dual filament bulb and if it is the running filament isn't burnt out.

Thanks. I'll try that wiring. I currently have the green and green/white hooked up. Guess I should hook up the brown. :)
 
Back
Top Bottom