throttle body and cables!!

[kpla51]

so heres my throttle body do i have to cut the end nipples off the cables and buy new ones since they don't fit through these tubes?

 

[hillsy]

Open the body up. You should be able to remove the bits that you are wanting to thread the cables through and probably just slot the existing cable sheathing into those holes.

 

[kpla51]

even opened you can't get the cable through those holes the nipple is too large

 

[sxecafe]

just file the nipples down a little bit to fit them through. I literally did this last night.

 

[kpla51]

i have to try that out thanks