You want to start out with a little play in both cables and both crabs opening at exactly the same time.
Then screw in the throttle stop (idle speed) screws so they just touch the slides and then another 2 turns each.
Set the mixture (air) screws to 1.5 turns out and fire it up. If idle is too slow, turn both idle speed (throttle stop) screws in another turn to a nice fast idle.
Adjust the air screws in and then out to find the fastest idle speed.
Then back the idle speed (throttle stop) screws back out 1/4 turn at a time on both until you have a nice even idle.
If the sweet spot on the air/mixture screw in much more than 2 turns out, the pilot jet is too large. If it runs best at less than 1 turn the jets are too small.
Does that make more sense?