lancepar
New Member
I had an interesting talk with a bike shop guy regarding the Ace tuning.
It went something like this.
Keihin Deni cp26 carburetor
“Changing the pilot and main jets is not the answer to improve performance, it’s the midrange that needs sorting and all it needs is an O-ring under the needle jet clip where it attaches in the slide.”
Has this been brought up on this forum?
Anybody done this or know what’s involved?
Not looked but does this mean the needle jet is not notched and therefore cannot be raised.
Also.
“To retain the air box but remove the OE foam filter and replace it with some gauze/mesh.” Reason being the foam is not engine filter quality apparently.
Something else for you tuners to think about.
8)
It went something like this.
Keihin Deni cp26 carburetor
“Changing the pilot and main jets is not the answer to improve performance, it’s the midrange that needs sorting and all it needs is an O-ring under the needle jet clip where it attaches in the slide.”
Has this been brought up on this forum?
Anybody done this or know what’s involved?
Not looked but does this mean the needle jet is not notched and therefore cannot be raised.
Also.
“To retain the air box but remove the OE foam filter and replace it with some gauze/mesh.” Reason being the foam is not engine filter quality apparently.
Something else for you tuners to think about.
8)