Turning out some pretty sick powder workt his week!

right now it is 6x4x4 but we are thinking of adding another 4ft on the sides to make it 6x8, not 100% on that, we do custom coating work so the bigger the oven the slower it is to ramp up in heat and get the part to PMT to do some specifics we need when doing blended colors, multi coat powders, custom masking, lettering, etc....

but we have no problem fitting frames, large pipes, and what not if that is your question
198054_10151155332733230_1448984886_n.jpg


476576_10150859031603230_153141427_o.jpg


530449_10151164755003230_419730761_n.jpg


382110_10151164755008230_193193222_n.jpg


18237_10151164755013230_1969907492_n.jpg


315775_10151164755043230_203141964_n.jpg


484387_10151164755053230_1453623871_n.jpg


320517_10151164755078230_411751995_n.jpg


559675_10151164755128230_1027174884_n.jpg


577788_10151164755133230_194288868_n.jpg


197870_10151164755188230_2027524538_n.jpg


305973_10151164755198230_1811951548_n.jpg
 
We are in woodstock IL, but we have parts shipped into us and out from us all over the contry, we have even shipped parts to Greece and Germany for builders out there... Just yesterday we got in 3 - 85lb boxes of parts from Cali... so you location local or not, is no problem!
 
Nice, Im in Iowa so i could probably walk there haha. When I get my bike I will be looking you guys up for sure!
 
JRK5892 said:
few more:
530360_10151163376083230_2045064679_n.jpg

I spy a CB mill. Very, very nice. Maybe someday I'll have the money to throw at my CB for such work.


I was wondering if you could comment on what one might expect to pay to have a motorcycle frame and swingarm coated? Ball-park figures, how much are we talking? I would imagine the cost varies if the frame is already blasted or needs to be. Do you offer both services?

I have been toying with the idea of painting my frame while I have the bike apart. But I am not confident in my ability to A) find a DIY finish that will hold up on the frame or B) pull off the prep and material handling skills required. I am not interested in stripping the frame ever again (thank you very much), so I am starting to think I should just do it right and send it out now.
 
Re: Re: Turning out some pretty sick powder workt his week!

nhbubba said:
I spy a CB mill. Very, very nice. Maybe someday I'll have the money to throw at my CB for such work.


I was wondering if you could comment on what one might expect to pay to have a motorcycle frame and swingarm coated? Ball-park figures, how much are we talking? I would imagine the cost varies if the frame is already blasted or needs to be. Do you offer both services?

I have been toying with the idea of painting my frame while I have the bike apart. But I am not confident in my ability to A) find a DIY finish that will hold up on the frame or B) pull off the prep and material handling skills required. I am not interested in stripping the frame ever again (thank you very much), so I am starting to think I should just do it right and send it out now.

I have a company that gave me a quote for my xs650 at $200 - 250 And that's just me dropping it off no pre sanding or anything

Send from my Razr Maxx HD
 
I had my cb350 frame and swinger blasted and powdered for 140
 
I had my cb350 frame and swinger blasted and powdered for 140
 
Typical frame we are around$200 get get more depending on if you want a custom color, or the size/type of frame... but $140 is insane cheap, after overhead, and time there is barely any profit left there, even on a smaller CB frame. if you ever need any quotes shoot me a PM more than happy to help you out!
 
Those fenders look sic. What would you charge for front, rear and side covers(metal) for my xs

Send from my Razr Maxx HD
 
Capt, i need to know what color you are looking to have done, you can shoot me a PM and we can talk about the work you need done
 
Back
Top Bottom