grcamna5 said:I found out that they wouldn't work because of the height of the piston pin in relation to the dome on the KZ440 pistons.
Has anyone found a good 66 or 67mm O. E. piston that'll swap in to the CB350 twin from Honda or another Japanese manufacturer ? I want to keep the compression ratio right at about 10.5:1
Wee Todd said:750 gpz pistons will work,outside circumference of the piston has to be machined good luck
grcamna5 said:Rex,
Do you think a pair of later KZ750 pistons would work in my CB350 engine ?
Yes, I will do that Rex & list the dimensions here..,after the Holidays.Nebr_Rex said:You need to measure a 350 piston like I did the 750 piston. And also the dome height.
.