Blake
the future is my friend
Started a new project today. Salvaged an old gardening wagon from my grandfather's shed. Turning it into a Rat Wagon for my 8 month old boy, Tiger. Wagon is in rough shape. Aside from the tub, I salvaged the rear arms, front steering hub, and braces. Everything else was rusted out. There's some significant rust around the bolt holes in the tub. I'm planning to weld a pate on the top & bottom of the pan to support and seal up that area. Debating whether or not it will be a lowrider or jacked in the rear. Planning to cut down the front arms, get new axles, bearings, wheels. Fab a new rear axle setup, run some 3/4" square tubing. Probably do some wider lawnmower tires on the rear. Will cut off the end of the pulling handle and weld a wrench on the end for a new handle. Not gonna paint it, just clean up the rust spots and leave it like it is. Wife thinks I'm crazy to put so much effort into an old wagon. ;D
I'm working off of these inspiration pics I found online:
Planning to do a chassis similar to this build:
http://weldingweb.com/showthread.php?t=36652
I'm working off of these inspiration pics I found online:
Planning to do a chassis similar to this build:
http://weldingweb.com/showthread.php?t=36652