WTB: 35mm Fork Nuts, Superbike Bars, Carbs, Exhaust, etc

[dmable44]

I have an 81' Honda CB650 that I am rebuilding. I need some things and also just looking for things.

Here's the list: A set (2) of 35mm non air-regulated fork nuts/bolts as well as a set of carbs without pressed in jets (VB44B/C's or others), a 4-1 header, 7/8 superbike bars, an 18" front wire wheel setup for dual rotors, possibly a brake master cylinder, and some other odds and ends I'm sure I am forgetting.

 

[DohcBikes]

This is not a Honda only site so when looking for parts it will be best to mention that its a Honda cb650. You're welcome.

 

[dmable44]

This is not a Honda only site so when looking for parts it will be best to mention that its a Honda cb650. You're welcome.

Right, thanks for keeping track of me! haha

 

[xb33bsa]

i have a cupl pairs bars one set chrome with scratches off an aprilia street fighter ..you know you gotta have 'em 8)
they are about 2" up with 2-1/2 back i think classick bmw-ish profile, not crash bent
they also have threaded end for the caps out there but then easy for bar ends mirrors 30+ shipping pm/email me for some pics

 

[dmable44]

i have a cupl pairs bars one set chrome with scratches off an aprilia street fighter ..you know you gotta have 'em 8)
they are about 2" up with 2-1/2 back i think classick bmw-ish profile, not crash bent
they also have threaded end for the caps out there but then easy for bar ends mirrors 30+ shipping pm/email me for some pics

PM'd

 

[focusinprogress]

I have these carbs that will fit for sale. I ended up grabbing the carbs I had intended to trade them for, so I'd sell this rack with boots for $80 shipped CONUS if you're interested. I have to check but there's a chance I have cb650 exhaust somewhere too.

 

[dmable44]

I have these carbs that will fit for sale. I ended up grabbing the carbs I had intended to trade them for, so I'd sell this rack with boots for $80 shipped CONUS if you're interested. I have to check but there's a chance I have cb650 exhaust somewhere too.

PM'd

 

[dmable44]

Still looking for fork nuts and handlebars at least.

 

[xb33bsa]

goddam shipping sure has gone up recently ,$15 shit a year ago it would have been under 10 even as we are cross country away
given that ,and i want somebody to enjoy these bars ill go $38 shipped priority mail its cheaper than parcel select

 

[xb33bsa]

actually i probably have some 35mm caps off honda forks as well
lets make sure they are right though i know some mfg's(kyb for one) fudge the wall thickness of forks which could then mean that the nuts may have different thread od and oring gland od and or depth for example, i have some 36mm yamaha maxim fork legs i am breeding onto 79 klx250 stanchions and the klx are a lot thinner wall with different larger diam caps the reason would be the weight of the bikes, heavy needs heavy
can you measure yours ? with a calipper +-.020"/0.4mm is fine
data for :
major actual thread diameter and oring gland diameter (the smooth part with the black rubber deal in it)

the caps are free i can ship with the bars