I can't quite figure this out.
Have an XS650 with BS38s. I rebuilt them witha kit from Mikes XS. New gasket, float valve, jets, plungers ect. Float height set to 25mm as per the Clymers.
A couple of weeks ago when I tried them out gas came pouring out of the airfilter on the right-hand side. When I shut off the petcock on that side, fuel kept pouring out, probably still pouring in from the fuel line between the carbs. I changed the float and put back the stock float valve on the left carb. Now when I turn the gas on, gas comes pouring out of the right side carb.
The two carbs are linked with a fuel line, is there something I'm missing?
Have an XS650 with BS38s. I rebuilt them witha kit from Mikes XS. New gasket, float valve, jets, plungers ect. Float height set to 25mm as per the Clymers.
A couple of weeks ago when I tried them out gas came pouring out of the airfilter on the right-hand side. When I shut off the petcock on that side, fuel kept pouring out, probably still pouring in from the fuel line between the carbs. I changed the float and put back the stock float valve on the left carb. Now when I turn the gas on, gas comes pouring out of the right side carb.
The two carbs are linked with a fuel line, is there something I'm missing?