roadracer28
New Member
I am currently building a street café racer.
The bike is a 1980 Yamaha XS850 and Im using fork+ single shock from a 2002 Yamaha R1.
The single R1 rear shock (stock spring) uses the OEM profile and stance position.
The R1 forks are much shorter than the OEM XS850 forks ( with stroke of 120mm vs 175mm) + the XS is much heavier.
With the preload adjusters set to max, the front end uses about 60mm in sag from fully extended (no rider on bike).
XS850 wet weight: 568lbs
R1 wet weight: 430lbs
I weigh 175lbs w/out gear and using RTech spring calc 1.16 is recommended on the R1 fork (using the 568lbs of the XS).
Im leaning towards a 1.2 because of the shorter fork will push more weight to the front of the bike.
Solid thinking or other thoughts?
Thanks,
Andrew
The bike is a 1980 Yamaha XS850 and Im using fork+ single shock from a 2002 Yamaha R1.
The single R1 rear shock (stock spring) uses the OEM profile and stance position.
The R1 forks are much shorter than the OEM XS850 forks ( with stroke of 120mm vs 175mm) + the XS is much heavier.
With the preload adjusters set to max, the front end uses about 60mm in sag from fully extended (no rider on bike).
XS850 wet weight: 568lbs
R1 wet weight: 430lbs
I weigh 175lbs w/out gear and using RTech spring calc 1.16 is recommended on the R1 fork (using the 568lbs of the XS).
Im leaning towards a 1.2 because of the shorter fork will push more weight to the front of the bike.
Solid thinking or other thoughts?
Thanks,
Andrew