time to draw back the curtain mobie, admit it, that is you slinging glue on tvjpmobius said:Haha . . .Actually, that likely would work excellently! No telling how long it would last, but despite the hokey commercial, it does seem to have all the characteristics you would want to do the job.
The Progressive Suspension shocks I used (originally for a XS650) fit fine with no chain interference, but it did raise the rear slightly so that the rear wheel barely clears the ground when on the center stand. I did have chain guard interference on my Kawasaki KZ440 when I put KZ550 shocks on - ended up cutting out a little bit of the chain guard to clear.JadusMotorcycleParts said:I wonder if other people have had this issue?
you must be a huge fat person putting the same shocks on a 200lb lighter bikezap2504 said:The Progressive Suspension shocks I used (originally for a XS650) fit fine with no chain interference, but it did raise the rear slightly so that the rear wheel barely clears the ground when on the center stand. I did have chain guard interference on my Kawasaki KZ440 when I put KZ550 shocks on - ended up cutting out a little bit of the chain guard to clear.
Yep. Good thing that the OEM shocks (built back in the '80s) work for you, so you must be some skinny assed little fart! BTW the maximum load limit (on the rear tire) is 456lb and basic weight is 154lb for a load of 302lb - way less than I weigh with gear.xb33bsa said:you must be a huge fat person putting the same shocks on a 200lb lighter bike
you gotta love that no more open triangle !! bwaaahhhaaa !!!zap2504 said:I know that you had been experimenting with 3-D printed side covers some time ago, but I've seen a recent trend with other custom bike builders that you might want to consider - custom leather bags to fit the triangle area. Like here: http://www.pipeburn.com/home/2016/08/29/snipe-yamaha-sr400-old-empire-motorcycles.html
nothin' from nothin' ain't nothin' !!! :-[Tune-A-Fish said:The mood ring will return
zap2504 said:I know that you had been experimenting with 3-D printed side covers some time ago, but I've seen a recent trend with other custom bike builders that you might want to consider - custom leather bags to fit the triangle area. Like here: http://www.pipeburn.com/home/2016/08/29/snipe-yamaha-sr400-old-empire-motorcycles.html
xb33bsa said:you gotta love that no more open triangle !! bwaaahhhaaa !!!
think of the millions of hapless spodes who have ruined a motorcycle and its tune with the stupidity of pods just to get that dumb as dirt open look,now to have a reversing trend eliminating the open tyriangle
priceless ;D