mattiebost
New Member
Added open K&N air filters to my XS750. It didn't run good before, but after the change it got even worse!
I followed some kind of guide from this forum.
And I upsized the following:
Main jets: 135 - 140
Pilot jets: 42.5 - 45
Still ran like crap. Trough the whole register.
THEN! I duct taped the open air filters about 3/4. And now I'm at this:
http://www.youtube.com/watch?v=P2_XMO8DayI&feature=youtube_gdata_player
My intention says that i should upsize even more, probably alot more, to get rid of that duct tape.
Something like:
Main jet: 155
Pilot jet: 50 or 52.5
The mixture screws (air) are less than 1 turn out. The exhaust is stock 3-2, but i have a 3-1 incoming...
Jets are superexpensive here in Sweden!? Bought those 6 jets for 60$ so i don't want to end up with a bunch....
What do you guys think?
Perhaps very hard to "guess" things like this...
Thanks ahead! =)
I followed some kind of guide from this forum.
And I upsized the following:
Main jets: 135 - 140
Pilot jets: 42.5 - 45
Still ran like crap. Trough the whole register.
THEN! I duct taped the open air filters about 3/4. And now I'm at this:
http://www.youtube.com/watch?v=P2_XMO8DayI&feature=youtube_gdata_player
My intention says that i should upsize even more, probably alot more, to get rid of that duct tape.
Something like:
Main jet: 155
Pilot jet: 50 or 52.5
The mixture screws (air) are less than 1 turn out. The exhaust is stock 3-2, but i have a 3-1 incoming...
Jets are superexpensive here in Sweden!? Bought those 6 jets for 60$ so i don't want to end up with a bunch....
What do you guys think?
Perhaps very hard to "guess" things like this...
Thanks ahead! =)