Yet another XS750 Cafe Racer

MCS also made some exhaust link pipes and machined some rearset brackets
 

Attachments

  • 100_2557.JPG
    100_2557.JPG
    954.6 KB · Views: 348
  • 100_2558.JPG
    100_2558.JPG
    842.1 KB · Views: 331
Just had 12 days off work so I got quite a few jobs done.
Engine nearly finished, waiting for 2 small gaskets which were not included in the kit, and polish the oil filter cover.
 

Attachments

  • 100_2567.JPG
    100_2567.JPG
    968.8 KB · Views: 348
  • 100_2568.JPG
    100_2568.JPG
    993.8 KB · Views: 377
  • 100_2569.JPG
    100_2569.JPG
    1,008.4 KB · Views: 347
I should get the fork stanchions back from Philpots in about 2 weeks.
I'm hoping to pick the frame up from the powder coaters next week.
The wheels are being rebuilt with flanged alloy rims and stainless spokes. Should be ready by the weekend.
Got a few smaller jobs done like the fork yolks a brake disc centres, fork lowers
 

Attachments

  • 100_2571.JPG
    100_2571.JPG
    829.3 KB · Views: 343
  • 100_2570.JPG
    100_2570.JPG
    966.3 KB · Views: 340
Picked up the wheels this morning just got to get some balance weights to fit on the spokes.
 

Attachments

  • 100_2572.JPG
    100_2572.JPG
    948.4 KB · Views: 331
  • 100_2573.JPG
    100_2573.JPG
    901.6 KB · Views: 342
  • 100_2574.JPG
    100_2574.JPG
    897.1 KB · Views: 347
I got the frame back from the powder coaters on Tuesday, and the fork stanchions back from being rechromed.
So I've made a start on bolting it all back together.
 

Attachments

  • 100_2584.JPG
    100_2584.JPG
    934.9 KB · Views: 341
  • 100_2585.JPG
    100_2585.JPG
    1 MB · Views: 340
  • 100_2582.JPG
    100_2582.JPG
    897 KB · Views: 330
  • 100_2583.JPG
    100_2583.JPG
    947.6 KB · Views: 349
Interesting, and lovely bike. I rarely think this but that is so nice a bike stock a restoration might have been in order. I'm usre I'll love the cafe version as well though.
 
I've done a bit more work over the last few days.
Got some of the wiring on theres still some tidying to do on the fuse box and left hand switchgear.
Made a start on mounting the rearsets and seat.
 

Attachments

  • 100_2589.JPG
    100_2589.JPG
    947.3 KB · Views: 451
  • 100_2588.JPG
    100_2588.JPG
    967.1 KB · Views: 343
  • 100_2587.JPG
    100_2587.JPG
    981.2 KB · Views: 362
  • 100_2586.JPG
    100_2586.JPG
    953.8 KB · Views: 336
Wiring finished.
Newtronic ignition fitted. Fingers crossed it will start tomorrow.
 
The Newtronic ignition is turning into a bit of a nightmare.
The bike started first time last week and ran very well for 10 minutes before 2 cylinders cutting out. Once the engine had cooled down it started first time again.
I carried out a few tests which showed the sensors to be at fault. Newtronic sent some replacement sensors which I fitted today.
Again the bike started first time ran really well for 20 minutes, I thought it was job done. I was just about to turn the ignition switch off when the bike cut out completely, sensors at fault again. So I've had to remove the whole thing and send it back for testing.
 
Finally got the ignition back and refitted seems ok
Fitted rear mudguard and light yesterday, just the brakes to bleed and take the bike out for a test ride and MOT.
 

Attachments

  • 100_2599.JPG
    100_2599.JPG
    1 MB · Views: 363
  • 100_2597.JPG
    100_2597.JPG
    972.9 KB · Views: 348
  • 100_2596.JPG
    100_2596.JPG
    976.1 KB · Views: 415
  • 100_2593.JPG
    100_2593.JPG
    880.9 KB · Views: 346
Hope the weather improves soon
 

Attachments

  • 100_2594.JPG
    100_2594.JPG
    863.9 KB · Views: 340
  • 100_2595.JPG
    100_2595.JPG
    953.1 KB · Views: 351
Why haven't I seen this before. That bikes is damn classy, very nice work!
 
Back
Top Bottom