Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Anybody???
Couple of questions:
1) On my carbs I have an Idle Speed screw and an Idle Mixture Screw. I cannot figure out for the life of me if out is rich or lean on the Mixture Screw. I assume since it is on the intake side that unscrewing the screw would make it run leaner (more air)...
Hello
Last winter I spent my time tuning and cleaning my 1969 CL175 beauty. Now that that project is done (minimally) I needed a new project to start. My neighbors (bunch of rice racers) were moving out of their house. They have had this POS sitting in their driveway for quite some time...
Hello Fellow Honda Lovers
I have a 1908 CM200T. I hade the wheels powdercoated but my dumb ass cut the spokes before measuring. I contacted Buchannan's and they don't have the bike in their database. Does anybody know the length / Guage of spokes needed for front 16" with drum and rear 17"...
Couple of questions:
1) On my carbs I have an Idle Speed screw and an Idle Mixture Screw. I cannot figure out for the life of me if out is rich or lean on the Mixture Screw. I assume since it is on the intake side that unscrewing the screw would make it run leaner (more air)?
2) Clutch...
Couple of questions:
1) On my carbs I have an Idle Speed screw and an Idle Mixture Screw. I cannot figure out for the life of me if out is rich or lean on the Mixture Screw. I assume since it is on the intake side that unscrewing the screw would make it run leaner (more air)?
2) Clutch...
Thanks for all the encouragement guys! Both my wheels are off to Buchanans to get polished stainless spokes, new nipples, and polished hubs yay Merry Christmas to me! Keep you updated!
I am bored waiting for the shuttle to pick me up so here are some picks of (or lack of) progress:
Polished fork housing:
You can kind of see the milky white spots in this pict:
Cool photo:
New Clubmans:
See Ya!
Thanks for all the input guys. So I got the forks torn down and noticed there were tons of imperfections in the aluminum so I decided to sand them down and polish them. I soda blasted off all the paint and spend numerous hours polishing and buffing. I am still not satisfied with the looks of...
Gonna try rebuilding my forks within the next couple of weeks....too damn cold out! I am off to Sweden for work on the 18th so I don't have a lot of time.
Yep just as you guys suspected it was the throttle cable routing. I rerouted the cable lubed it up and it's good to go! Thanks Again!
BTW I had to put Clubman Bars on they are so much cooler
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.