Recent content by benzonaruckus

I need to research this efi kit. This would be great on my 360. Is that battery a CV4 brand by any chance?

Nice...I thought the little jig at the end was funny

really really like it alot

where'd you get the fork springs? I really like the rear shocks. I've been looking to do both mods similar to that? also where did u get the rear shocks? hard to find eye to clevis shocks

how much ya want for the coils? 3 or 5 ohm?

Okay so if I go to the dual in dual out setup I've seen alot of guys post great things about the mikexs coil is this the one I need and should I be getting a resistor type spark plug cap? and if so how many k ohms spark plug cap should I get for the setup? Is this the right coil? Part#17-6805...

Thank you. just to be clear, both blue and yellow on one side and black white on the other? the instructions say: "the polarity of the two primary terminals is not important. one coil tower fires positive and one fires negative. it does not matter which plug fires positive or negative."...

I have a accel coil single in dual out that I need help wiring up on my cb360t. I've got the two wires from the condensor blue & yellow and then the kill switch wire black/white. the accel coil 140403S has two posts to attach the power wires to but I'm not sure if I'm supposed to hook up 1. the...

I really dig that cb350.

Hey guys I'm looking for a rear fender for my cb360t(76). I took it off and cannot find it now that we've moved:( pm me or post it up with what you got. thanks!

sweet. thanks guys..I'm gonna give it some more effort and see where it can get me. The elec start never worked(had a broke switch) when i opened it up. fixed it, and I"ll just kick start it to see if it'll even run...if I can't get it I'm gonna take it in and pay for my mistakes :(

throttle side has kill/run and push to start. start has black-black/red-yellow/red...kill has black/white-black. i got those pretty much figured out but the schematic says i'm missing some connections from that side. if you guys have a switch with run kill and start- no lever type for sale let...

Hey guys I'm in need of a throttle side start run kill switch with no lever spot. my cb has disc brakes and so I don't need the lever. as the title says it's for cb360t...76 but will take any switch that'll work with this year Please let me know what you got

ok i"m pretty positive I got everything figured out now. I read the schematic 1k times over again and just for reference can any of you tell what color wires you guys have coming out of your RIGHT/THROTTLE side control for a cb360? should be the same for cb/cl 350-360. I'm positive I fucked up...

Re: 76 360t wiring woes( making progress) ok. So i got the headlight figured out..it was a switch wiring mistake on the company and myself but I am left here with a couple unconnected wires(I can't seem to find my wire harness from the kill switch) the ones I have no connection to are the...