Recent content by foebux

So basically cut the mufflers, see if the new pipe slips on and weld ? Is there any way to go about doing that without any welding jobs?

Hi all, I have a question regarding to my exhaust system. I have a 79 Suzuki GS 550 with the stock 4 to 2 exhaust system. I'd like to disassemble or cut (whichever is easier) the stock muffler and mount a custom one. Such as this ...

Re: Re: New Jersey area affordable powder coating Hawthorne nj Here's the website http://www.peerlesscoatings.com

Re: New Jersey area affordable powder coating Thanks for the help guys. I found a place called peerless powder coating. They'll do frame swing arm and the triple tree for 225.

Viet, Alright the passenger pegs are grinded off. The passenger frame diameter is 19 mm by the way. I'll be purchasing the rear sets soon

Viet, Since this will be mounted using your frame bracket, can I grind off my passenger peg brackets?

To clarify, I can use the "old" plugs to read my engine advance / temp right?

Hi viet, Will you be able to draw me a diagram of what your talking about? I read it over again but still not getting an accurate picture I my mind. Thanks!

Re: Re: Need carb jetting advice for my GS550 Thanks for the advice, what does it mean to be "in the correct heat range" and "chop tests"? Also how do I determine if I'm in the correct heat range?

Re: Re: Universal - Adjustable Rearset - more pictures and discount option Will this be enough? Let me know, thanks

I believe mine are vm22ss. The link I've provided above is the carbs that I currently have. I'm just wondering because I read people that have around 100 size main jets. Mine is 80 stock and was recommended to change them to 87.5 with pods and the new exhaust

Re: Just bought a 79 gs550 doing a semi budgeted project. My first project will need many advice Engine teardown / rebuild. It sucked getting it out of the frame. Valve cover off Head is off The pistons aren't too bad. The rings are still within the tolerance level. New gaskets are...

Re: Just bought a 79 gs550 doing a semi budgeted project. My first project will need many advice Started on the fork seals they were a bitch to get out. Even tried boiling the damned thing. I used the nail remover part of the hammer to pry it out. I had much more leverage that way I tried...

Re: Just bought a 79 gs550 doing a semi budgeted project. My first project will need many advice So the frame is bare.. Things ordered so far : Black clubmans Engine gasket kit Legendary bug eye seat from a dtt member A taillight to fit the seat Fork seals Speedo with idiot lights from...

I have a 1978 Suzuki gs550. I will post the dimensions once I get home from work. Sent from my SPH-L710 using Tapatalk 2