Recent content by rnkwill

here are the photos!

Looking to sell my project that i picked up last year. BIKE DOES NOT RUN! We got the motor to start so i know it runs at least. Tank is rusted inside but i removed all the paint and was going to remove the rust inside. Will throw in the two bottles of klean strip prep and etch that i got with...

any pointers as to when i start the process? or should i dilute the product at all?

Finally after having waiting months for some free time to open for myself,i have decided to work on my project 79 CB750F. The gas tank is VERY rusty inside and im contemplating if i should waste my time and money and clean the rust out? or buy a tank with very little rust in it to save me the...

Looking to finally get around to my dohc cb750 project i picked up in the summer with spring break around the corner and my time freeing up so im looking for a 79 cb750f gas tank that is rust free! i'm located in chicago.

The bike will be used mainly for street as far as gearing goes i might want higher gears and i was going to do a gsxr fork conversion on the bike so it wont be using the stock wheel. I will give cycle x a call when i get the chance to.

should i be going for the 18 teeth or 19 teeth?

thanks, i will look into that conversion for my 750.

Bought my first bike and need to replace the chain and sprocket. Previous owner sent me an excel worksheet of parts needed and recommended the izumi chain(630x90, o-rings). Any reviews on them? also what sprocket should i look into buying?

thanks! ill give them a call when i have some free time this week.

I'm located on the northside of Chicago near the skokie area and was looking for a reputable shop that can be able to make me a custom tank for my 79' cb750F. Also was interested in getting my frame redone.

the cables did move freely before i attached them to the carbs. I'll take a look when i get the chance to sometime this week to see if its binding on to something.

yeah they moved freely when they were not connected to the carbs. I dont recall how they were routed off the top of my mind

the previous owner cleaned the carbs

Hey guys, I just bought a 79 CB750F with the hopes of rebuilding it. This is the first bike i've owned and dont have much knowledge but want to learn how to work on motorcycles. I reattached the throttle cables on to the carbs but now the throttle isn't smooth. By smooth i mean it feels like...