Recent content by semaj4712

Hey sorry guys, not too active on this forum, I drained the oil and found a really nice metalic flake, sorta like the kind you want painted on the tank, not in the oil...called the builder right away and hes gonna take it and tear it down...id have no problem doing it myself, I would have built...

I actually figured it out, on my particular bike I didnt need thr additional fused green part, with out that it wires up just like the stock solenoid, works great

Thanks guys, all great advice, I hope to get to this tonight but it happened in the middle of a busy week

Thank you very much, yea I wasnt sure about the tach and no I did not build it myself. I am not as familiar with motorycycle engines, but know my way around them based on my experience from older V8s. I will check that out and see if oil is getting to the cams. That diagram will be helpful...

So ok, this may be a premature post because I have not gone back outside and looked at the bike now that it has cooled down...but... I was riding my bike today for the first time really outside of up and down my street. I have spent the last year having the engine rebuilt and redoing pretty...

So I have a CB500T which is running a custom wiring harness, the problem I am having is the starter was not working so I picked up a Universal Starter from Dime City...Like this one I know that one side of the main two terminals goes to the positive and the other to the starter...And I...

Interested in the headlight bucket if you have it or are selling it

Hey guys, not to social on here but wanted to know if anybody could recommend a shop or person to do some work on my 75 CB500T, looking to possibly get the engine rebuilt, I have new seals, gaskets, bolts, and need to do a full tune and custom exhaust. Any help would be greatly appreciated, I...

Just left Home Depot, and they have some that are pretty close but nothing that is in the ballpark, I will get the measurements tonight and pm you with what I need if your still available, how long do you think it will take you to make them, just need two?

Cool I will let you know

You sir may be a genius, if not tho is this something you could make pretty easy?

I am looking for a pair of velocity stacks to be custom fabricated, preferably welded out of stainless steel with slight angle on it to clear my battery tray. I want them to look welded and raw, sort of like this, just not in chrome... Willing to pay to have these made... needs to fit the...

Hey guys, you can see in the picture below that my mikuni 32s do not quite fit onto my cb500t, not only does the choke lever not clear the block but also the stack hits the battery tray, anybody know of a carb boot designed for the mikuni 32s that had a slight angle in it?

Possibly a dumb question but just wanted to run this by someone and see if I am correct...I am relocating my ignition coils, further back to run a different tank and I was wondering, when mounting the ignition coils they cannot be touching anything correct, as in they need to be free to heat up...

Yea I've thought about using something like this