Search results

  1. seaversk

    A CL360 and a dummy

    I got my new wiring harness today from Sparck Moto! I'll post some pictures of the beauty later.
  2. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. Thanks for moving this Sonreir! I got the engine back in the frame! I had to take off the bracket on the bottom right front of the frame. Then wedge it back in with the engine in place. (and yes I did the total noob thing and took it apart before it...
  3. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. I was watching naked speed and the guy helping Zeeks build said "any 11 year old can take a bike apart. It takes a special 11 year old to put it back together." Well I am not a special 11 year old, I am a struggling 27 year old haha. Also my basment...
  4. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. Why does nobody mention how hard it is to get the engien back in. :o :'( :o Here's some painting on the headers and heat guards I did. With high heat ceramic rattle can.
  5. seaversk

    First build 75 cb360 brat tracker "Alexandra"

    Looking cool I like the paint!
  6. seaversk

    "Cafe Racer" such a loose term! Craigslist "Gem" of the week!

    Which one of you did this? ;D http://columbus.craigslist.org/mcy/4843781143.html
  7. seaversk

    76 CB360T REBUILD FROM PARTS

    Most people on here will tell you get the engine back together and on the frame and get it running properly. I am in the same place you are after I put everything back together and get it running I'm going to consider frame modifications
  8. seaversk

    1975 CL360 Build

    Looking good, I'm working on a brat-tracker thing too. I have the same tires, they aren't on yet but they look good on yours!
  9. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. I've made it pretty far I am replacing my points and looking into ricks r/r set. Also still considering a new wiring harness from Sprock. I got pretty frustrated with the points and decided to put on new handle bars and headlight. I should have executed...
  10. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. "Ohm" my! This shit isn't easy Sent from my SAMSUNG-SM-G900A using Tapatalk
  11. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. Ok so i made it to step one with no spark I tested the voltage at the core ends and only got 2 volts max, is that enough? (I picked up a multimeter I've needed one for a while) I traced the black and white wire and was getting 12+ volts all the way to the...
  12. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. I'll be trying the 5 steps you posted later today. Sent from my SAMSUNG-SM-G900A using Tapatalk
  13. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. When I took the carb apart the floats were very far from even to each other. I'm probably not using the right words I'm sorry, this is a whole new world for me . Sent from my SAMSUNG-SM-G900A using Tapatalk
  14. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. Haha so for all your guy's help I am going to let you laugh at me more. The cluster of wires that go to the ignition switch were not hooked up to the starter magnetic switch. They were probably loose for a long time and me dicking with the bike...
  15. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. I still have the original fuse holder with the glass tubes it actually looks like its in good shape. Thanks for the diagram, 12v bulb check. I am reading thru the pinned post "read this first" and "read this second"
  16. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. Yep I replaced the ignition switch but it worked well at first (I got power to the lights, and electric start, engine would rev but not turn over) then I came back to it a day or two later and nothing. I like the light bulb idea I think I have a lamp...
  17. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. Charged the battery still nothing, worst of all the girlfriend is dragging me to a concert tonight so I cant get any work done. I have the manual I just need to buy/learn how to use a multimeter. I know little about turning a wrench and even less about...
  18. seaversk

    calling Cl360 owners what kind of bars are you running?

    I am still stock but looking at these clubmans from amazon they are $50 but come with some extras. http://www.amazon.com/gp/aw/d/B005O4ZWBE/ref=aw_wl_ov_dp_1_2?colid=22QS27D72V57&coliid=I1GA1KYCQZ6VAX Sent from my SAMSUNG-SM-G900A using Tapatalk
  19. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. I have the battery on a charger at advanced auto parts which is free. We will see how that works. I will look in to picking up both of those tools. Fixing the carbs got a little pricy so I'm hoping this works. Thanks for the advice. Sent from my...
  20. seaversk

    A CL360 and a dummy

    Re: Nothing happens when I turn my key. I was hoping to avoid electrical problems. I will put that on my shopping list, thanks. Sent from my SAMSUNG-SM-G900A using Tapatalk
Back
Top Bottom