Search results

Selling my '72 Honda CL350. Have the title in hand and has 53xx miles on the original odometer. I bought it four years ago and it ran great after a tune up. Ended up tearing it down to the frame to clean and freshen it up. Unfortunately I'm moving out of the country in 6 weeks, it still needs...

This is a bit of a long story/scenario so here's the cliffs notes: -Tore down and rebuilt a 72 CL350. All new ignition bits with electronic ignition plate. Replaced head gasket and above on the motor. Didn't touch the crank/pistons or transmission. -Started up after some tuning and ran great...

Two lids for sale: Shoei ST-Cruz - Black, clean shape, small scuff from being dropped on concrete (only visible very close up), comes with visor and neck curtain, very light, $160+ new - $60 Nolan N20 Traffic - Light metallic white with striping detail, tan inside, very light fighter style...

I have a 1980 CB750K (DOHC) that I cleaned up and did a couple light cafe mods too. It's not quite done yet but what's everyone think it's worth? I only ask because I see DOHC CB750 values all over the place. Stats: -17k and runs strong -General tune up with new tires and cleaned/rebuilt carbs...

Got my CL350 running a little over a week ago and had some starting issues when I was a little ways from home. I had it towed to a shop to have them take a look and just to give the bike a once over after all the work I did. The initial issue I was having was that I couldn't get it to start...

Brand new in box, Nolan N20 helmet. Truly a rad helmet in the 'Player' style with the metallic white paint. Flat black/white strips across the lid. Comes with a blue lens. $150

Originally I was concerned about the timing of my engine but I was graciously given the FSM doc and I think I'm good. Also my compression is golden, I have spark, and my fuel is good with wet carb floats. This is my carbed motor of any sort so I'm not sure if I'm missing anything obvious? After...

In the process of getting my CL350 motor back together and the points and tach housings are not going on with any ease. I'm tried rotating the cam and it doesn't make much of a difference. I can get the housing about half way on with a light amount of force. I know these housings can be a pain...

Pretty excited about my CL350 being finished up. This nice, early Spring weather was making me especially anxious. The entire build was done in the den of my loft ;D I just got the seat back from the upholstery shop last week and finished some more final details. Just need to adjust/tune some...

Almost done redoing my CL350 and I'm re-wiring it from scratch. It's been way too long since I've built a custom harness and I'd really appreciate someone looking over my harness. I took the stock CL350 diagram and modified it to: -Headlight low beam always on with ignition (running an...

Stuff for sale: Sorry these pics suck. CL350 OE Rear Shocks - Work great, need to be cleaned up to be perfect $20 for the pair CB350 Top Triple Mount - Fresh gloss black paint, no cracks/damage $15 Make an offer on these... CB/CL350 Stock Condensor - 400 miles CB/CL350 Points Plate - Works...

No longer needed. Thanks!

As the title says. Looking for a good condition bar controls/switches and an upper triple tree mount. PM me. Thanks Jon

Hey all- Looking to get rid of the stock levers/switches and I'll need to get something going to replace the stock front brake switch. I've seen some use an early CL175 front brake cable with the built in switch, but I've had a tough time finding them. What are some other front brake switch...

Hey all- I've started the winter tear down of my CL350 I bought over the summer. Plan is clean up lot of the cosmetics of the mechanics and rebuild the motor. As well as sort out a few bits that bug me. Oh and I'm building this in my loft apt, haha. Trying to keep the place from smelling too...

Having a lot of trouble shifting in neutral after my CL350 has been running for a while (20+ mins). Using original clutch lever/cable with Moto Bits rear sets. I tried to tighten the clutch cable at the bar as much as possible, without being too tight; it helped a bit when cold but not when...

Hey All- New CL350 owner and new to forums, wanted to say what's up. Picked it up a few weeks ago with some work done already. The plan is to clean up some bits then redo the motor, some wiring and the bars over winter. Cheers Jon Obligatory pics: