Search results

Perfect! i will try it out.

Hey Guys, Havnt been on for awhile but i finally got a new project. a CB750 Starter only , no kick start and having an issue where when pressing the starter button the starter of course moves but sounds like its grinding? After 2-3 Tries the Bike turns on. Its almost like you have to catch it...

Wow amazing Progress.. Great build! =)

You're the Man!

I couldn't say it any better!!!! 8)

I think its funnier when someone just specifically signs on / registers and only wants to post a comment as so? Its a bike night, who cares who is there. Get on your bike and ride, have a beer and talk about the times you have fallen, parts to trade or buy.. and smell the dripping oil.

Hey guys, I have a little issue. bike runs , but not perfect. its a 1973 cb350 twin, stock headers only and velocity stacks.. when i put it on choke, (even thou i dont need to) it dies off .. or the good question is on the left of the stock carbs what is chock on? the lever pushed all the...

Guys i KNOW theres a site out there , last i saw it had Japanese writing.. its micro turn signal and starter button. looks like this but this is just a radio shack button

Those honestly took the most time. i wanted to pull the leather (Which is super thick) and get a certain feel and look. the leather is SUPER SUPEr smooth and nice. it has a wax type finish to it. so even if u scratch it.. rub a lil oil that comes off your hands and its all gone.

Yes we will be putting cans on them and tucking under the frame on the belly .. and a rear and front fender is getting fabricated already :) . thanks guys for the input!

Sorry forgot to add info about the bike itself. 1973 CB350 Twin, with a 1971 Front end swap Powder coat rims with 100 up front, and 110 in the rear. works really nice and clears .

After some hard work.. and still working on her The team has completed another bike. Custom seat - Leather is amazing.. same leather user for the handle grips custom made. FiberGlass seat custom and some pieces here and there are custom.. Velocity Stacks Pipes will be cut and bent inward...

well it looks like to me that the brown in the back will only get power (yes when igni is on) but when the actual wires in the front of the harness are connected. i looked at the high/low/off switch and the wires consisted of the ones i stated. so for the lights to all work it needs to draw...

IF im reading the diag. correctly, which i have tried 100 times lol. for.. low beam you need to make sure the following are connected White Wire to headlight, brown white (constant) , Yellow, and White wire on harness which all are positive. for high beam, Blue wire going to headlight...

Worked like a charm. i actually was using 330ohm resistors BUT had + and - on the wrong terminals! using a LED flasher relay which works good, BUT noticed that my indicators stay on. which i dont really care. now the only thing i need to do is figure out why the brown wire for the brake lic...

k ill try that thanks!

Yes sir :)

I put an actual LED on there. the ones from Radio shack that have the silver looking cover over it.

So i install LED indicators for my neutral. i install a 300k ohm on the post side of the LED and when i turn the bike on, the green like turns on for a sec and off. i tried everything and still doesnt work. what gives!? =(

Hey guys, just wanted to see what you guys did to fix this. but a friend of my has an issue where his la rosa seat is WAY to stiff. it has 2 shocks like this https://www.larosadesign.us/images/SLSASHOCKS.png now we dialed down the tension till the last thread and STILL its stiff as hell...