Search results

Ditto ;D

bump...

As the title states. Must be in good working condition, doesnt have to be the same year but has to bolt up the to the stock muffler mount. it'll be nice if it still has the clamp and whatever else it needs to bolt up to the stock 4 into one header on the right side. Thanks and pics would be nice.

So what u have pictured is two coil or one? Because I wire four wires .

May seem like a dumb question but will these work on a 74 cb400f ? I know mine has two coil with two wires per coil, anyways I have at least onw mayb two bad wires.

10 1/2 long 4in OD

http://killboy.blogspot.com/

I have something similar. Its shaped like a cylinder, made from SS, it was used at my work for a prototype for a refrigerate. Ill post pics tonight.

Clean bike!

pm'ing

How much for the headlight/bucket, lense in good condition ? Are the mounting brackets be un bolted ? Pm me with price shipped, thanks. -adam

San Antonio here ! Lets get together

Yea I have the broken piece, may just use the jb weld method, can't find the aluminum rod at HF. And the jets I have are #75.

Is this one correct ? http://jetsrus.com/a_jets_by_carburetor_type/jets_keihin_99201-601_main_primary.html Right carb p/n ? I measured the length and o.d and they seem to be pretty dame close So does anyone know the stock main jet size ?

Well im going by the ones listed on DCC website and compared them to the ones I pulled off my carbs: http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-carburetor-parts-keihin-cv-primary-main-jet-65-026-012.html Not sure what piston type means, it...

Anyone know the # is for the main jet ? Is it 75# ? I called and emailed DCC but no reply yet and im about to place an order along with other itmes. They are Keihn CV style jets, as seen in the pic above post.

Yep sure will get them new, some of the jets are pitted. Thanks for the links DCC has everything!

Yep its the pilot jet. Is there a link where I can get them and maybe only the gasket? Alot a questions here but I leaning...just want to hear this puppy fire up.

^ Great advice, Ill be stoping by HB tomorrow. Made some progress today, what few hours I had. Everything seems to be clear and all the ports free of debres. Need 3 more to clean (soaking in fuel inj cleaner/wd-40 mix) this one came out pretty. Here are two pins I was talking about, seem like...