Search results

  1. B

    Kickstarter issue 71 cb 175 help!

    Thanks 1sttimer I pulled the engine and adjusted it, I also think I adjusted the clutch wrong so I'm rebuilding Monday and hopefully get this thing on the road.
  2. B

    Kickstarter issue 71 cb 175 help!

    Hey guys, Long story short a buddy of mine kickstarted my bike forward on accident and stripped the lower casing and pitted the top case, I pulled the engine replaced with a new bottom case and rebuild it to the books, I'm having trouble figuring out how the kick starter spring goes...
  3. B

    Can somebody give me some cb125 swingarm specs?

    Hey measuring tonight for sure sorry for the delay!
  4. B

    Can somebody give me some cb125 swingarm specs?

    What year? Or does it matter. I have a 76 cb 125s, I can measure it tonight after work.
  5. B

    1976 cb 125 pulling a chewed up kickstarter!

    I finally got the case open after some terribly chewed up case screws, and got to the inside and saw the kickstarter gear is all the way on the bottom, do I need to take all the gears out or is there a way to bypass this? I tried to get it out but it's getting caught by a tiny bit, anyone with...
  6. B

    Need! Cb 175 tank 68-69

    Hey guys, I'm on the hunt for a 68-69 tank for a cb 175, any leads would be awesome and I'll take whatever I can get my hands on! Thanks, Bryan
  7. B

    1975 cb 125s stripped bolts/stuck engine case

    Awesome! Thanks man. I'll grab some screw extractors, I've got all the heads off, case isn't sliding at all unfortunately.
  8. B

    1975 cb 125s stripped bolts/stuck engine case

    Hi guys, I bought a 1975 cb 125s, for a couple hundred bucks but it's in rough shape, engine was seized so I started to take it apart but the pervious owner stripped out most of the engine case screws/bolts, I've drilled a few out after trying to use my impact driver but they're...
  9. B

    Bryan from Oakland

    Hey Leigh, I'm on 40th and Telegraph, so not far from you at all. Bryan
  10. B

    Bryan from Oakland

    Hey guys, Brand new to the site and am stoked to find such a rad place. I'm currently building my first bike, it's a 1971 CB 175. I'll probably start a build page on all the things I'll be messing around with and the help I'll most likely need. I'm excited to check everything...
  11. B

    1971 CB 175 rear bearing seal

    Hey guys, I just replaced my bearings and the front and rear seals are shot. I ordered new front seals, but I'm having trouble finding the rear one. Anyone know of a good place to buy these or maybe I'm looking up the wrong name for the seal? Any help would be awesome! Thank you...
Back
Top Bottom