Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Hello gentleman,
It's been a while since I've been on here since I sold the cafe cb450 project for my wife to her brother. You know the deal loving across country a couple times and also had my bike, which is now a project.... Anyway I have a muffler from Cone Engineering that I'm not going to...
I HAVEN'T POSTED HERE IN A WHILE SINCE I SOLD MY PROJECT CB450 BUT I HAVE A SET OF MIKUNI PD50A THAT I BELIEVE CAME OFF A 70'S HONDA CB650. I'M SURE IT WILL FIT OTHER MODELS BUT I DON'T KNOW ENOUGH ABOUT THEM. THESE ARE IN GOOD SHAPE BUT NEED TO BE TAKEN APART AND CLEANED. I HAVEN'T EVEN LOOKED...
I bought these for myself for riding boots but my foot is a bit too wide. They are lower than conventional cowboy boots and have a really sweet side zip for easy on/easy off.
They are: Wrangler Size 12D
8.5" total height
1.5" Heel height
12.5 insole (Has pointy toe so allow for some wiggle...
I know I can find them on ebay but I thought I'd check to see if anyone had some engine gasket floating around that they didn't use and would be willing to sell to me for cheap? I have a '70 CB450, I've taken off the engine covers to polish and powder coat them and now I need some gaskets to put...
I'm almost done polishing the engine covers on my Cb450 project and I was thinking about clearing them so I won't have to go back and clean them up constantly after it's all said and done. I can use a good House of Color clear but the cheap way is always rattle can clear. I know it wouldn't be...
I have a few little things.
Sissy bar -good shape a little surface rust, should come off easily w/ steel wool or a light sandblast.
-SOLD- Chrome bars -As far as I can tell they are a 12" rise -SOLD-
Black bars -They were chrome but I scuffed them up and painted black. They have the holes...
I got this upper triple tree from a friend of mine to see if it would fit my on project CB450 but it didn't. He told me that it came off a CB550. I'm 90% sure that's what it came off of but if someone that knows these bikes better than I can tell if it in fact came off of something else please...
I don't really need new spokes for the CB450 but I DO need the spoke nipples. (no snickering) If the price is right then I can be convinced to buy new spokes too. I've seen the ones out of Thailand on Ebay and I'm sure any of you that are rebuilding your wheels have too so I'm looking for...
So I guess I'll give just a bit of history first. I know most everyone just scrolls down to the pics then moves on but it makes me feel good, so here goes.
I bought this project '70 CB450 for my wife last Christmas complete with sissy bar, leather bags, ape hangers and highway bars. All in all...
I put the carbs back on the CB450 the other day and made a gas tank out of a 20oz water bottle and fuel line and I couldn't get it to run except for about 3 or 4 seconds with a shot of starter fluid. So, I had air and spark but obviously no fuel... I took the carbs back apart and and found that...
Like an idiot I bought one of the cheap ignition switches off ebay and the [b]VERY FIRST[b] time I turned it the center where you put the key in just fell out! I don't know why I was expecting anything higher quality than that but live and learn I guess. SO... I am in need of an ignition switch...
So I'd like to get several people to post pics of their drum brakes that they have "vented" and get their opinion on it. My project bike wheels are taken apart and if I decide to vent them I have to do it before powder coat. So what do ya'll have, what have you seen, what have you heard, and...
I'm in the process of building a '70 CB450 for my wife, so some of the seat modifications are specifically for her. She is only about 5' 1" 105lbs so I narrowed the front of the seat. Also I tried to keep the foam thin enough for her to be able to stand comfortably and still have enough padding...
I'm building a 1970 CB450 for my wife and I have some CL450 pipes that I really want to use or even cut and make something like cafepete had on his BOTM mock up picture. My question is, are the stock CL high pipes really bad to ride around with because of the heat or is it not to bad. My wife...
I know there are a bunch of them on ebay but I figured I check here to see if anyone had some they weren't going to use that also wanted my money. Plus I've heard that the cheap ones on ebay aren't that great and I was hoping not to pay upwards of 50 bucks for the nicer ones. So if anyone has...
I'm building a '70 Cb450 for my wife and the upper triple tree is broken. I know that some of the 750's will work just have to make the meters fit but if I can I'd like to just replace it with another 450 tree. It is the pinch bolt type tree not the top bolt, (I had someone on another site offer...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.