Search results

I just stumbled upon this topic and had to chime in. the purist in me cringes a bit when I see this frame naked with no gears, but then again. you did put a lot of love and effort into it and that's what's important. I love bicycles too. also/especially track bikes and single speed bikes. here's...

Title says it. I'm in Denmark so would need it posted. I could probably need a lever to go with it as the splines in the one i have are ground down. Thanks a lot.

sorry forgot to mention, it is electronic. 1 to 100 watts.

I hust bought a generic flasher relay with two wires. There is no markings on it, but one is red and one is black. Will I ruin it if I get it in the wrong way round?

the turn signals must be grounded, yes. I don't know about the horn though.

Hi and welcome. I'm from østerbro. I have noticed a few new danes here lately. We ought to get our own regional forum soon.

I hate the tron look, but 8th grade ms paint style would be pretty cool.

Great links, thanks. Still not sure I have the guts to rip it all out and make a new system, but something has to be done. It's like everytime I touch something something else breaks.

Got some chambers! test fit photos on the blog: http://makesaman.blogspot.com/2012/05/chambers.html

Hey, I could really use some encouragement right now. The weather is ace here right now, the bike starts and runs like a dream and I just want to go riding! however, the turn signals don't flash. All bulbs are working, grounds are good revving makes no difference. I can get the front and...

Hi I'm considering making new wiring for my Suzuki GT500, but am a bit scared by it. Is there a simple universal diagram I could use for guidance? Since I have electronic ignition, kick only and want to use a capacitor instead of the battery I only need a diagram for the lights, horn etc.

Thanks for the offer Geoffrey. I just cant justify sending the disc halfway around the world. Twice. I think it will be both cheaper and easier to find a new(er) one locally. Plus I like the look of modern disc on a spoked wheel.

It does. I plan to get a modern disc for it instead of drilling the old one.

jo, det er mig fra FK. Jeg synes netop det er super at den er lidt flad og mørk og ikke så metalagtig i farven. meget inspirerende. Jeg troede du var fra kbh da du nævnte wrenchmonkees.

det ser godt ud! Hvor fik du lavet din tank? Og hvad måtte du slippe?

It just ran! Would you believe it? On my birthday. Ha. I went to check up on the plugs and caps and I noticed that when I kicked it, not only where there a spark, but it startet to run for a few revs once in a while. I hooked up the plugs and kicked it over and it ran. No choke! It even idled...

One thing that just hit me though: If I jam both leads between head fins I get a good spark from both, but if one is hooked up to the plug and plug cap there's no spark from the other. Doesn't that suggest a problem in the plug or cap? I have to put those under some further testing. You're...

I know, Shitty video, but you can just about make out the spark from the ignition lead. I had jo jam both leads between fins to make them spark. I discovered that by pure accident, it never crossed my mind. http://www.flickr.com/photos/76174475@N08/6961154466/ Spark plug caps measure just short...

I'm sorry, man. I don't fully understand the first part. Would you care to elaborate? I'm both noob and non-english so I need precise guidance here.

Re: How is a proper spark supposed to look? Thanks a lot teazer I have checked all coils as per Per Norstedt http://home1.stofanet.dk/optik/suzuki/ignition-gb.htm ignition leads measure about 2kohms more than they should, thats the only problem I can find. I didn't think that would cause a...