Search results

Does anyone know where to find the tiny washers that go between the o ring and the spring on the pilot air/fuel screw for a honda cb500t? I'm rebuilding carbs and it appears that the previous owner didn't use the washers.

I'm trying to remove the flywheel to repair the springs/rollers of the starter clutch no a 75' honda cb500t. So far, i've taken off the left side cover, removed the stator, removed the 14mm flywheel bolt to expose the underlying threads. I've purchased the flywheel puller bolt 16mm RH...

I'm working on a 75' honda cb500t that I picked up for the winter months. It doesn't want to start after adjusting points and timing and has a very very weak spark. Therefore, I'll need to start spending money and want opinions on what the best use of my money. The stock...

WIth winter approaching, I'm looking into new solutions for storing my motorcycles. Traditionally I've jammed the bikes in the garage with battery tenders, but with an increasing stable of horses in the garage I'm running out of room and need to think outside the box a bit. I have a large...

I'm working on a 75' honda cb500t and need a stock or aftermarket right hand switch, on/off, starter button. Stock on/off starter button switches seem scarce, so what aftermarket options do you recommend? If aftermarket switches, wiring diagrams would be helpful.

With winter approaching I've purchased a 75' honda cb500t to work on during the cold months. The bike is titled and heavily worn, non running, but complete. For $400 it wasn't much of a commitment. Which leads me to my first question. Is this bike worthy of fixing, or how worthy is this bike...