Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Im a new member here but have been messing with hondas for a long time. I have a real nice CB200T that was given to me quite a while ago and just recently decided to do a cafe conversion on it. Im not sure how far i am going to do with it but a few things that I'm going to do for sure are the following:
*Lowered drag bars or clip ons
*Cafe style seat
*Powder coat everything (I own my own powder coating shop)
*Smaller low profile turn signals and brake light
*Make bike as light as possible
*Go through engine (only 3400 miles on the bike so wont expect to have to do much other than clean and tweek
*New sport tires
I'm sure there will be more but thats all I can think of right now. I plan on documenting the entire process here. Please feel free to add options, suggestions, and help here as I go along. Im not sure how fast the progress will be as I do have a powder coating business to run as priority but hopefully I can get it done for this spring.
Heres a pictures of it before, during, and the results of the tear down:
Below is the seat i bought for the build from Glass from the Past as well as a wheel i powder coated and polish for a friend of mine. I plan on doing the same thing to my 200 wheels. I just got done cutting the old seat hinges, helmet hangers, and inner rear fender of the frame. I need to figure out a good way to mount the seat to the frame that still allows for access to the battery as well as all the factory electronics/fuses. Any suggestions?
I just ordered some the other day and am waiting for them to come in the mail. If you email the guy with the model and maybe a quick pic of the frame near the mounting area he will help out every way possible. Heck of a nice guy.
yeah that cb200 remix build is a heck of a bike! I dont know if im going to go that crazy nice but im going to try to make a nice clean bike. I own a powder coating shop so i am relying on my powdering skills over my fab skills to make this bike look good. Curbcast what do you mean by making up a brace for the stock pegs? Is there a thread i can look at?
Also what do you guys use to mount your fiberglass seats?
Whatever it takes to hold them down! Seriously, could use the stock mounting hardware, double sided velcro tape, I think somebody even mentioned embedding magnets into the fiberglass. I'm sure there are other options too.
I have the motobits on mine and I'm not all that handy. I made a little cut on the passenger peg brace and they fit right on. It's all in the directions they provide. The rear-sets are great and have almost endless adjustment to get them right where you like.
Well its been a while but I have some progress to show you all...
I've decided to mount the rearsets similar to the remix bike so off with the passenger brackets..
Welded on seat brackets and cut some sheet metal to make a upper inner fender to mount my electronics and protect the bottom of the seat.
Heres a mockup with the seat and tank installed. Im going to increase the angle that the seat goes up on the bottom of the hump so that i can mount a led brake/signal light/license plate bracket under the seat.
My cylinders powder coated black with polished fins. My head will look the same with polished valve covers and silver powder coated side covers.
Now in process is to order the motobits rearsets and weld on some metal brackets for them to mount. I have wheel hubs polished, the spokes powder coated, and waiting to powder coat the rims to be able to put the wheels together. Finish powder coating the engine parts. Then powder coat the frame and suspension parts. A lot to do but things should start going faster here soon.
Haha.. Actually I own a powder coating shop and I have been doing this for many years. It does look awesome. I powder coat the part then polish the edges, makes a nice clean edge. Its standard powder, which is good up to ~450+ degrees. If the cylinders get any hotter than that I have other problems.
Haha.. Actually I own a powder coating shop and I have been doing this for many years. It does look awesome. I powder coat the part then polish the edges, makes a nice clean edge. Its standard powder, which is good up to ~450+ degrees. If the cylinders get any hotter than that I have other problems.
....For a the 200 you are looking at around $100.00 for the cylinder(s). Its quite a lot of work, blasting, masking, powder, bake, then polish. Its so worth it though. Just getting ready to do the same to the head, should look great! Will post pictures when im done.
Well I just got my engine back together after giving it a nice powder coat and polish treatment. The engine didn't even have 3500 miles on it and looked brand new inside but it was pretty dirty and very stock looking on the outside.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.