It's not that hard. Put CB500 clutch springs in it and don't worry about it again. It'll be much better when you're done.
Black_Z28 said:Where would I get the 350 springs...shouldn't I replace the discs as well? If so, any recommendations on that as well? I'll check out the honda manual and see what needs to be done. Are there any tips or tricks when replacing the clutch discs? Thanks guys.
I was reading that using normal engine oil...I used 10w-30 when I changed the oil, can cause slipping on a wet style clutch disc. Could this be causing my issue?
Mydlyfkryzis said:Wrong.
8 Fiber plates, 7 metal.