1980 cb650 getting the cafe treatment

uBER_SLO

New Member
This is how it sat after I picked it up.
before.jpg


after putting a new battery and fixing some wiring snafus I took the first ride, I got antsy and ordered a few "mandatory" parts from dime city cycles.
cliponsrearsetsandgrips.jpg

I must say, I was pleasantly surprised how quickly they shipped to me. big ups to them. I've already recommended them to a few friends. Thanks guys.

The night I got the parts, I decided time is precious and got the clip ons installed lol.
cliponsinstalled.jpg


Today I rearranged all the cables and wiring and beat the hell out of the tank for bar clearance. I'm in the hunt for a dunstall tank or something to that affect, anyone who can help please feel free to give me a shout.

Thanks for looking
 
Uber slow? I'd say pretty damn quick.
This bike is going to be finished before the end of page one!
:) :)
 
took the bike out due to the nicer than normal weather. seems like I have an electrical issue. bike loses power after a riding, maybe 10 miles, and dies. then the bike is acting like i have a dead battery. but if I wait a while I can crank it right back up like nothings wrong. any ideas?

I'm also brainstorm on upgrade to a more modern frontend. if anyone has any info or help I will mail ya some beer lol

heres a picture of the bike as of yesterday. soon I should have a honda cr tank on it's way then i can start making the plug for the seat.

jan30.jpg
 
Boy the more I read about the problems people have had with their bikes, and I have too, the more I realize how unlucky i've been.... But I digress. Sounds like your had tank is not venting air in properly, and it's starving your bike for fuel. If you let it sit a while, the pressure equalizes and off you go. Unless it won't crank over. ;) . Then I'm just stupid. Anyway, next time it happens, try opening your gas cap. If you hear air rushing into your tank, and your bike starts right away, that is the problem.
 
i tried that, but i noticed that the bike has no electrical power, to the point that the horn doesn't even make noise.
 
got a little done the other day.

bought this
2000gsxr600alstareedition.jpg


then mocked up the frontend
gsxrfrontendmockedup.jpg


I want to use the rear wheel from the gsxr aswell so we'll see if I have to fab up a swingarm or what
 
I dig that front end on their. Add the rear wheel and it will look even better.

Going to leave them gold?
 
I probably will leave the gold, i've always liked that looked. I still don't have a clue on the paint scheme so we will see if they stay gold.
 
got a little bit more done. I've been out of it for a while but I feel I've made a little head way as of yesterday.

DSC00282.jpg


disregard the seat. that was for sh!ts and giggles

DSC00284.jpg
 
Is that the cr tank from Omar's? More importantly- will it work with the stock seat pan? I have a stock seat pan with customized upholstery that I don't want to have to butcher and I'm looking at tank options.


You should consider renaming your thread lightning fast. I've been pouring over my '80 cb650 for 3 years now and it still doesn't look as good as yours!
 
You bike is really starting to look good. I have the same one and want to start making it a racer this fall. Looking for advise on tank, seat to start with. Also when looking for CB650 parts what other years and models will work on mine?
 
Back
Top Bottom