Danish_Cafe
Active Member
Yeah, I know what you mean about the brass, i think they are gonna stick out a bit to much when the bike is done, since it's the only brass on the bike, so I might paint them later on. But it was free so I'll stick with it for now.
Thanks Arnold, Rims were sand blasted before primer and paint, and even thought it's rattle can it's really looking good! And seems to be very strong and hopefully it will last when tires are mounted.
Btw fiberglass wasn't completely dry, so will wait till tomorrow before i cut it to shape and take new pictures.
Also getting ready for wiring, bolted on the coils, and will continue the wiring tomorrow. I'm doing a minimum of wiring, ignition, front, rear and brakelight only.
Also tomorrow I hope to do some last bondo and primer to the tank before final paint. Really looking forward to this!
Thanks Arnold, Rims were sand blasted before primer and paint, and even thought it's rattle can it's really looking good! And seems to be very strong and hopefully it will last when tires are mounted.
Btw fiberglass wasn't completely dry, so will wait till tomorrow before i cut it to shape and take new pictures.
Also getting ready for wiring, bolted on the coils, and will continue the wiring tomorrow. I'm doing a minimum of wiring, ignition, front, rear and brakelight only.
Also tomorrow I hope to do some last bondo and primer to the tank before final paint. Really looking forward to this!