When I checked yesterday, I had no spark. Earlier, I had tested the coils and the primary and secondary resistance were within spec, and am thinking that the coils are/were not the problem. Also checked continuity and condition of wires from ignition to coils- all good. So I took off the points cover and saw a big dirty mess. I couldn't clean just the points, I had to clean everything, even the plate.
When I cleaned inspected the points, I noticed one of them has a pretty big pit, so that means a new one is necessary. No problem because I have extra new ones. Well, they are not for the ignition system I have. Sooo, I guess it would be advantageous to just replace all three at the same time. I found points for like $50 each (bike bandit) and I started thinking that for that price, maybe an electronic ignition is the way I should go. Can anybody offer any suggestions as to what I should be looking at?
I found this one, but thats about it:
http://www.ebay.com/itm/SUZUK-GT380-GT550-GT750-BOYER-ELECTRONIC-IGNITION-NEW-/261018880711?pt=UK_Motorcycle_Parts&hash=item3cc5f00ac7
I had a Pamco electronic ignition on my CB350 and thought it was really easy to install. I tried looking for their website, but I can not find it. I will keep searching. Thanks in advance for your help
Oh yeah, also got my front blinkers and will install them tomorrow morning. I think after that I can put the headlight on and call the wiring up there done.