crazypj
Split personality, I fake being smart
Kill switch on later CDI/TPI bikes connects ignition to ground or makes circuit instead of breaking it. You may have to use 'OFF' position to get continuity
You need to make sure the ground wire is connected to handlebars if you use original rubber mounts (horn won't work either if there isn't a ground) Original ground wire is connected to bottom of one of the bar risers through top yoke
Sonreir said:. Pressing the start button then grounds the solenoid through the green/red wire, activating it.
You need to make sure the ground wire is connected to handlebars if you use original rubber mounts (horn won't work either if there isn't a ground) Original ground wire is connected to bottom of one of the bar risers through top yoke